PrimaSELECT™ABS+ is the next generation of ABS filament. With this
filament you will experience far less warping and cracking. You will also
discover that PrimaSELECT™ABS+ has a near perfect layer adhesion which, of
course, leads to more beautiful prints. The mechanical properties are also
enhanced to make PrimaSELECT™ABS+ extra strong. This filament is the perfect
choice when you are looking to print objects that requires high strength and
very high impact tolerance.
(Acrylonitrile Butadiene Styrene) is a material that is widely used in both
industry and as filament for 3D Printers. It´s strong, light weight and very
durable. The well-known Lego blocks are made from ABS and as you know that is a
very high impact resistant piece of plastic. PrimaSELECT™ABS+ is even
better than that.
is a very ""easy to use"" material it prints almost like PLA and has a matt
surface finish on your printed object. PrimaSELECT™ABS+ also has limited
risk of warping when comparing to other brands of ABS. PrimaSELECT™ABS+
comes in a selected range of vivid colors that are all based on the RAL color
system which in turns guarantees that you will get the same color every time you
order a new spool.
With PrimaSELECT™ABS+ we have succeeded in making an ABS that are very
easy to print with and gives you stunning result every time. This filament has a
very high impact strength and are perfect for printing tools, toys and
different utensils. Thanks to the relative high melting temperature
PrimaSELECT™ABS+ is also suitable for prints that are going to be used in
hot environments. When printing with PrimaSELECT™ABS+ you can use a
slightly higher print temperature then average ABS to get an even stronger
result. The special properties of PrimaSELECT™ABS+ makes it the best
ABS replacement in our range. Now you don´t have to worry about the problems
that you likely are used to with common ABS. Massive warping, cracked prints and
horrible bed adhesion are now a thing of the past.
If you have a dual hot-end set up and are going to print with support we
recommend that you use PrimaSELECT™PVA that bonds well to our ABS and are
easy to remove, PrimaSELECT™PVA is even soluble in water.
When printing with PrimaSELECT™ABS+ we recommend that you use a heated
bed. Set your heat bed to ± 80-90˚C for best results.
sticks on BuildTak or glass plate coated with adhesive spray or glue stick.
are available in diameter sizes of 1.75 mm and 2.85 mm.
Our state of the art factory is equipped with the latest in laser measuring
technology to ensure that you will receive a spool of filament with a very
tight diameter and roundness tolerance. This in turn makes for a filament that
is compatible with most common printers on the market today.
Why should I use PrimaSELECT™ABS+?
- ·Very high impact strength
- ·Improved mechanical properties
- ·Extremely good layer adhesion
- ·Higher melting point than PLA and regular ABS
- ·No hazardous fumes