A Plasticized Copolyamide TPE
An extremely flexible yet durable and strong TPE and nylon based material. PCTPE
was designed to be both highly flexible, yet retain the durability of nylons.
Single perimeter parts can be wadded into a ball, yet are difficult to stretch
out of shape. With a lower printing temperature than our nylons, PCTPE easily
prints on "Any" 3D printer at only 225C - 230C. While extremely flexible the
nylon insures 1.75mm line is no problem for direct drive or bowdens feed
systems. That determination was made by our testers as every sample of PCTPE
sent out was 1.75mm.
From AOSmith Industries: PCTPE is ridged enough to hold its shape when welding
yet flexible enough that it wont snap or break when the workers bump it against
the table or apply side forces to handles.
- Prints at 225C - 230C on glass w/PVA heated to 45C
- Elongation @ Break = 370%+
- Excellent bonding even at 0.3mm nozzle size.
- We are today releasing our new highly flexible 3D Printing material
called PCTPE. PCTPE stands for "Plasticized Copolyamide TPE" or a chemical
co-polymer of highly flexible nylon and TPE (thermoplastic elastomer) .
PCTPE has several unique features that allow any user to print a highly
flexible part with the added durability of our nylon polymers. This
combination of polymers was developed specifically to allow anyone using
current FFF 3D Printers to print parts from durable prosthetics to complete
cosplay wearable outfits, cell phone enclosures as well as highly flexible
utility/industrial parts. The flexibility of PCTPE means that the end parts
will have the smooth lustrous texture of nylon, the added flexibility
offered by a rubber like TPE, yet maintain the high durability and
non-delaminating benefits of all taulman3D Printing materials.
The list of features includes:
- Proven performance = Tested worldwide by the 3D Printing community -
summer of 2014.
- Prints on bowdens or direct drive extruder. = From 1.75mm SeeMECNC "MAX"
bowden to LULZBOT "TAZ" direct drive.
- Print temperature = 230C
- Low shrinkage = prints on glass with a 50% water/PVA glaze heated to 40C
- Super Layer to layer bonding that allows for single perimeter walls to
be folded along thread axis.
- Takes on any acid based color dye (RITT) very fast = 5 min @ 140F
- Takes on acid based antimicrobial coatings for footwear and prosthetics.
- Color = Bright White/reflective Nylon surface
- Tensile PSI = 5,043
- Modulus PSI = 10,954
- Elongation @ Break = 497%+
Flexibility - As some users have experienced difficulties with 1.75mm
flexible materials, we have worked with our manufacturer to perform an added
"draw" process. A process that actually stretches the material during the
final mfg stage. This is a similar process used to make large nylon rope for
cruise ship docking maintenance. This added stretch increases the tensile
properties of the raw 1.75mm and 2.85mm line such that the tendency to fold
or buckle is eliminated. Some of our testers remarked that the raw line was
actually stiffer than printed parts! This additional process allowed us to
increase the percentage of TPE resulting in a material that gives the user a
wide range of design flexibility based mostly on the nozzle size, number of
perimeters and percentage of internal fill used during slicing. From thin
parts that wad up like thin paper to thicker shoe soles with just the right
flexibility, PCTPE is an easy-to-print material meeting a long list of
requirements from users.
Ease of use - The addition of TPE and a new lower temperature nylon, puts
PCTPE into the class of slicer software settings most of us use for ABS.
230C print temp and other ABS settings defined by nozzle size and printer
Super layer to layer Bonding - PCTPE ensures that you do not need to use an
enclosure just to get excellent layer bonding of parts from 100mm to
1,000mm+. With PCTPE the layer bonding will allow you to print single
perimeter walls and bend or fold along the printed axis without delamination
Wearable Texture - As nylon is known to be a comfortable material to the
touch, we made sure that the 3D Printed texture of PCTPE was just as smooth
to the touch as any wearable nylon. This lustrous texture is key to making
new wearable objects that flow with body movements. In addition to the
lustrous texture, the flexibility of PCTPE is more accommodating for complex