Tired of fragile 3D printed parts? Armadillo 3D printing filament is a perfect
alternative to some of the most common rigid materials on the market.
Made from a specially formulated thermoplastic polyurethane (TPU), its
advantages against PLA and ABS lie in its printability and toughness. Armadillo
is an excellent material to use for bridging with virtually no warping issues.
When you need a rigid product that can withstand wear and tear, Armadillo's
resistance to fracturing makes it a perfect replacement.
Suggested Applications: braces,
fasteners, gears and protective covers.
bridging capabilities and
virtually no warping
better than PLA and 60% better than ABS
Chemical resistance to
many materials, including naphtha, ASTM Oils #1-3, petroleum and freon
Consistent diameter and
material properties providing reliable, high quality prints
heated bed required. Build
platform requires same prep as PLA
220°C – 230°C
Room temperature – 45°C
Glue or blue painters tape is suggested if not using a heated bed.
Top and bottom layers: 15-20 mm/ sec (900-1800 mm/ min)
Infill speeds: 45-60 mm/ sec (2700-3600 mm/ min)
Layer 2+ use cooling fan if available.