Kostenloser Versand
ab 100EUR Bestellwert
Schnelle Lieferung
2 - 4 Tagen
1 meter insulate tape. 2,2 cm width
Protect the cables on your printer by put on insulate tape. Lengh 1 m, width 2,2 cm
Auf Lager: 10
0,50 €
1 meter insulate tape. 5 cm width
Protect the cables on your printer by put on insulate tape. Lengh 1 m, width 5 cm
Auf Lager: 2
Filament Nipper
Smaller nipper that is perfect to cut of the filament with.
Auf Lager: 0
6,90 €
IGUS DRYLIN RJ4JP-01-08 5/set
Runs smooth with less noise. Without balls, entirely in polymere, this component can work without...
Auf Lager: 64
8,50 €
Micro Swiss - 0.4 mm -nozzle for MK10 All Metal Hotend ONLY A2 - Hardened Steel
This is Micro Swiss MK10 All Metal Hotend
Auf Lager: 17
21,90 €
Micro Swiss - 0.5 mm -nozzle for MK10 All Metal Hotend ONLY A2 - Hardened Steel
This is Micro Swiss MK10 All Metal Hotend
Auf Lager: 6
21,90 €
Micro Swiss - 0.6 mm -nozzle for MK10 All Metal Hotend ONLY A2 - Hardened Steel
This is Micro Swiss MK10 All Metal Hotend
Auf Lager: 0
21,90 €
Micro Swiss - MK8 Plated Wear Resistant Nozzle 0.2 mm
This is MK8 style nozzle, it is made from
Auf Lager: 1
15,90 €
Micro Swiss - MK8 Plated Wear Resistant Nozzle 0.6 mm
This is MK8 style nozzle, it is made from
Auf Lager: 3
15,90 €
Micro Swiss 0.2 mm Nozzle for MK10 Allmetal Hotend Kit
This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit
Auf Lager: 21
19,90 €
Micro Swiss 0.3 mm Nozzle for MK10 Allmetal Hotend Kit
This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit
Auf Lager: 15
19,90 €
Micro Swiss 0.4 mm Nozzle for MK10 Allmetal Hotend Kit
This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit
Auf Lager: 39
19,90 €
Micro Swiss 0.6 mm Nozzle for MK10 Allmetal Hotend Kit
This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit
Auf Lager: 29
19,90 €
Micro Swiss MK10 .4 mm All M​etal Hotend Kit
This is an all metal hotend upgrade kit
Auf Lager: 51
39,90 €
Micro Swiss MK10 Nozzle 0.4mm upgrade
For PTFE lined hotends only
Auf Lager: 13
15,90 €
PTFE Thermal Barrier Liner for MK10/MK11 Extruder
Fits to MK10 Extruder. 4/2mm. Lenght: 36 mm
Auf Lager: 71
Scraper
Good to use when take off object from the build plate.
Auf Lager: 6
3,95 €
Small scraper
Auf Lager: 1
2,90 €
Vetus HRC40 Tweezers
Vetus HRC40 Tweezers.
Auf Lager: 28
4,90 €
Wanhao 2 pin female connector
2 pin female connector
Auf Lager: 0
4,90 €
Wanhao 2-Pin Male Connector
This 2-Pin connector is used to connect a fan, a heated platform bed, or a power unit to the...
Auf Lager: 19
Wanhao 24V extruder fan D4
Fits to duplicator 4. 24V, 015A
Auf Lager: 38
6,90 €
Wanhao 24V motherboard fan
1 x Genuine Wanhao replacement cooling fan. These are fitted to all Wanhao Duplicator 4, 4X, 4S...
Auf Lager: 60
3,90 €
Wanhao 4-Pin Connector
This 4-Pin connector is used to connect your thermocouples, your (Left extruder heater and fan...
Auf Lager: 9
Wanhao Acrylic Cover Duplicator 4 Series
Wanhao Acrylic Cover for all Wanhao Duplicator 4 models.
Auf Lager: 11
Wanhao Axis to timing pulley D4
Fits on the right side.
Auf Lager: 4
1,90 €
Wanhao Bed Screw and spring set
Wanhao Bed Screw and spring set
Auf Lager: 14
9,90 €
Wanhao Belt - Medium
Medium Belt.
Auf Lager: 0
Wanhao Belt - Small Closed S2M-160
Small Closed Belt S2M-160
Auf Lager: 8
Wanhao Belt - Small Closed S2M-202
Small Closed Belt S2M-202.
Auf Lager: 28
Wanhao Belt large
Wanhao Belt large
Auf Lager: 2
6,90 €
Wanhao Belt Tension Spring
This belt tension spring delivers maximum tension to your belts on the Wanhao Duplicator 4 and 4X...
Auf Lager: 16
Wanhao Bracket to Z rods
This bracket holds the two Z rods in place. One bracket per package.
Auf Lager: 5
4,90 €
Wanhao D4X Touch Panel
This touch controller replaces the touch pad found on the front of the Duplicator 4 and 4X printers.
Auf Lager: 4
14,90 €
Wanhao Drill 0,4 mm
Drill that can be used for clean 0,4 nozzle. Use this very careful though it can brake inside the...
Auf Lager: 33
1,49 €
Wanhao endstop cable
This endstop switch cable connects the Duplicator 4's (and 4X's) microcontrollers to it's endstop...
Auf Lager: 0
4,90 €
Wanhao extruder carriage D4
Plastic carriage to dual extruder on Duplicator 4/4x/4S
Auf Lager: 1
Wanhao extruder metal bar MK10
Wanhao extruder metal bar MK10
Auf Lager: 5
11,90 €
Wanhao extruder metal bar MK8/MK9
Wanhao extruder metal bar MK8/MK9.
Auf Lager: 13
11,90 €
Wanhao Filament guider D4
Wanhao Filament guider D4 fits to Duplicator 4/4X/4S.
Auf Lager: 9
3,90 €
Wanhao Flange bearing MF105ZZ
Fits to the x-axis rod holder that drives the Y-axis belt on Duplicator 4 series.
Auf Lager: 10
1,90 €
Wanhao Flange bearing MF85ZZ
Fits to the small axis that holds the belt transmission on Duplicator 4 series. (x axis)
Auf Lager: 20
1,90 €
Wanhao Glas Plate with Clips 4X/4S
Wanhao Glas Plate with Clips
Auf Lager: 0
17,90 €
Wanhao Heat Board Cabel Set
Heat Board Cabel Set
Auf Lager: 2
14,90 €
Wanhao Heating cartridge Duplicator 4
Wanhao Heating Cartridge for Duplicator 4.
Auf Lager: 28
7,90 €
Wanhao Heating Plate 4 series
This Heated Bed Kit replaces the bed assembly on the Duplicator 4, 4X and 4S printers. Pull out...
Auf Lager: 3
39,90 €
Wanhao Hot end nozzle mounting block MK10
Wanhao Hot end nozzle mounting block.
Auf Lager: 0
8,90 €
Wanhao Hot end nozzle mounting block MK8/MK9
Wanhao Hot end nozzle mounting block
Auf Lager: 33
8,90 €
Wanhao Insulated Cover Pack MK10
Wanhao Insulated Cover Pack MK10.
Auf Lager: 0
0,90 €
Wanhao LCD Screen 4x / 4s
This LCD display replaces the display found on the front of the Duplicator 4 and 4X printers.
Auf Lager: 0
19,90 €
Wanhao LCD to Touch Controller cable D4
This cable bunch connects the Duplicator 4's (and 4X's) LCD screen to the Touch Controller. This...
Auf Lager: 10
14,90 €
Wanhao LED strip
Wanhao LED strip that fits all Wanhao Duplicator models except Duplicator 5.
Auf Lager: 7
9,90 €
Wanhao Left Rod Mount
Left mount
Auf Lager: 1
Wanhao M3x3 Grub screw
Use to hold the heating cartridge in place.
Auf Lager: 15
4,90 €
Wanhao M4x3 Grub screw
Use to hold the guiding tube in place.
Auf Lager: 63
4,90 €
Wanhao Mainboard DP4/4X/4S
MightyBoard is a DIY Open Source 3D Printer Control Board
Auf Lager: 5
Wanhao MK10 full set Double Extruder
New MK10 dual-extruder assembly replaces the MK9 assembly on the Duplicator 4 and 4X. Includes 2...
Auf Lager: 0
Wanhao MK10 hot end
39,90 €
Wanhao MK10/MK11 guiding tube
Wanhao MK10 guiding tube
Auf Lager: 15
5,90 €
Wanhao MK10/MK11 noozle
Nozzle to MK10/MK11 Extuder.
Auf Lager: 110
10,90 €
Wanhao MK8-MK10 Drive Gear D4
Drive Gear that fits to MK8/9, MK10 extruder.
Auf Lager: 15
7,90 €
Wanhao MK8/9 nozzle
This brass extruder nozzle replaces broken, fractured, and clogged nozzles on your MK8 and MK9...
Auf Lager: 13
9,90 €
Wanhao MK9 extruder top plate cover
This Top Cover Plate fits over the MK9 dual extruder assembly on the Duplicator 4 and 4X. This...
Auf Lager: 3
Wanhao MK9 uppgrade Kit
Wanhao MK9 uppgrade Kit
Auf Lager: 0
14,90 €
Wanhao Power Supply Unit D4 - 4X / 4S
Replacement Power Supply Unit for the Duplicator 4 and 4X.
Auf Lager: 2
39,90 €
Wanhao PTFE Thermal Barrier Liner MK8/MK9
Fits MK8 and MK9 Extruder. 3/2mm
Auf Lager: 13
Wanhao Right Rod Mount
Right mounting
Auf Lager: 0
Wanhao Rod holder D4
Wanhao Rod holder. Fits to Duplicator D4. Made of steel.
Auf Lager: 7
5,90 €
Wanhao Stepper Motor Driver D4 - 4X / 4S
This Stepper Motor Driver with Heatsink replaces one of five drivers found on the Wanhao...
Auf Lager: 25
13,90 €
Wanhao Stop Switch for 4x/4S
1 x Genuine Wanhao replacement Endstop switch. These switches are located at the end of each axis...
Auf Lager: 10
11,90 €
Wanhao Thermocoupler Kabel D4
Wanhao Thermocoupler
Auf Lager: 8
9,90 €
Wanhao Thumb nuts
Thumb nuts that are good to replace the wing nuts under the build plate with. Fits to Duplicator...
Auf Lager: 23
1,90 €
Wanhao Timing pulley D4
Wanhao Timing pulley
Auf Lager: 43
Wanhao Touch panel to Duplicator 4S
Touch panel with SD card reader.
Auf Lager: 3
14,90 €
Wanhao Wire pulley
Fits to MK10 extruder.
Auf Lager: 10
4,90 €
Wanhao X-axis rod 4,93 mm
X-axis rod that is located on the back/front in Duplicator 4 series. This rod turns the pulleys.
Auf Lager: 6
6,90 €
Wanhao X/Y Stepper motor cable for D4 series
Wanhao Step motor cable.
Auf Lager: 12
5,90 €
Wanhao XY axis motor
This X & Y Axis Stepper Motor replaces those found on the Duplicator 4 and 4X printers.
Auf Lager: 10
24,90 €
Wanhao Z Axis Motor
This Z Axis stepper motor with threaded shaft replaces the motor driving the Z Axis up & down on...
Auf Lager: 3
Wanhao z-axis stepper motor cable D4
Stepper motor cable to Z-axis on Wanhao Duplicator 4 series.
Auf Lager: 22
5,90 €
 
 
 
På svenska In English Auf Deutsch
Preise in: 
 

Folgen Sie uns

Youtube

Kontakt

Box 841
245 18 STAFFANSTORP, SCHWEDEN

info@3dprima.com

46 40 684 97 90