This solid constructed 3D Printer has dual
see through walls, a heated
glass print bed and a
Bowden style extruder. The extruder has the stepper motors
positioned at the back of the machine which results in a light weight print head
assembly enabling high
speed 3D Printing.
The CreatBot DX prints beautifully in PLA and ABS as well as other filaments
including soluble HIPS and PVA. A great machine for engineering and education,
stacking up multiple objects for production work, large architectural models,
sculpture, jigs and fixtures
All metal chassis
Smart adjustable extruder
Gear motors feeder
Ceramic panel hot bed
Metal hot bed tray
Large build volume of 300 x 250 x 300 mm
Filament detection system
Print in temperatures up to 400
Continued print in case of power loss
All enclosed build space
A 3D printer requires a certain weight to insure stable
operation. This is why a all metal chassis is the best way to go when it comes
to 3D printing.
CreatBot extruders have an intelligent cooling system, this
ensures that the filament is feeding at the optimal temperature all the time.
The height adjustable nozzles allows you to align your two nozzles very quick
and easy. Perfect when you want to print with support, different material or
just two colors. All CreatBots from 3D Prima comes with dual extruders as
Your CreatBot is equipped with a power management module. When
the print is finished and there is no action taken within 5 minutes the printer
will shut down. Very useful and very energy efficient.
Multi-function key pad
CreatBot has a multi-function keyboard. This makes for very easy
handling and direct access to many of the most used functions, including Z shaft
up/down, heating/cooling of hot bed, pause, resume print, browse the SD card and
A gear motor can produce more torque compared to the general
stepper motor, this ensures that there is a smooth feeding of the filament at
all times and that retraction is perfect.
panel hot bed
On top of a silica heating plate there is a stunning ceramic hot
bed which is more expensive then glass but also provides a better heating
distribution and a more even heat. The ceramic plate is very smooth and provides
a very good adhesion.
hot bed tray
An all metal hot bed tray makes for a very stable print platform
which in turn improves stability.
The DX boasts with its impressive build volume of 300 x 250 x 300
mm, that is more than enough for most makers. This means that you can print your
creations in 30 cm height and with a resolution of 0.04 mm.
If you should run out of filament during a print, don’t worry.
The printer will go into pause mode and let you change the filament – then you
just hit resume, easy!
The nozzles can operate in temperatures up to 400 degrees
Celsius. This means that you can use a wide range of different filaments. It
also provides you with a very stable temperature during printing.
If you should have an unexpected power loss the printer remembers
the last known position, stores it, lowers and retract the filament. When the
power comes back on you can continue to print.
enclosed build space
On the CreatBot you have a totally enclosed build space which
prevents large prints from being cracked or warped.
CreatBot DX with dual extruders
Packed in a wood crate
1 x SD card
1 x USB cable
1 x Power cable
1 x Tool kit
1 x Manual
2 x spools of 1 kg 3.00 mm filament
Cura software on SD card