FREE SHIPPING
Orders > EUR 100 within EU
Fast delivery
2 - 6 days within EU
1 meter insulate tape. 2,2 cm width
Protect the cables on your printer by put on insulate tape. Lengh 1 m, width 2,2 cm
In stock: 6
€0.50
1 meter insulate tape. 5 cm width
Protect the cables on your printer by put on insulate tape. Lengh 1 m, width 5 cm
In stock: 15
Filament Nipper
Smaller nipper that is perfect to cut of the filament with.
In stock: 41
€6.90
IGUS DRYLIN RJ4JP-01-08 5/set
Runs smooth with less noise. Without balls, entirely in polymere, this component can work without...
In stock: 12
Micro Swiss - 0.4 mm -nozzle for MK10 All Metal Hotend ONLY A2 - Hardened Steel
This is Micro Swiss MK10 All Metal Hotend
In stock: 14
€21.90
Micro Swiss - 0.5 mm -nozzle for MK10 All Metal Hotend ONLY A2 - Hardened Steel
This is Micro Swiss MK10 All Metal Hotend
In stock: 21
€21.90
Micro Swiss - 0.6 mm -nozzle for MK10 All Metal Hotend ONLY A2 - Hardened Steel
This is Micro Swiss MK10 All Metal Hotend
In stock: 13
€21.90
Micro Swiss - MK8 Plated Wear Resistant Nozzle 0.2 mm
This is MK8 style nozzle, it is made from
In stock: 7
€15.90
Micro Swiss - MK8 Plated Wear Resistant Nozzle 0.6 mm
This is MK8 style nozzle, it is made from
In stock: 7
€15.90
Micro Swiss 0.2 mm Nozzle for MK10 Allmetal Hotend Kit
This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit
In stock: 6
€18.90
Micro Swiss 0.3 mm Nozzle for MK10 Allmetal Hotend Kit
This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit
In stock: 4
€18.90
Micro Swiss 0.4 mm Nozzle for MK10 Allmetal Hotend Kit
This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit
In stock: 23
€18.90
Micro Swiss 0.6 mm Nozzle for MK10 Allmetal Hotend Kit
This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit
In stock: 9
€18.90
Micro Swiss MK10 .4 mm All M​etal Hotend Kit
This is an all metal hotend upgrade kit
In stock: 110
€39.90
Micro Swiss MK10 Nozzle 0.4mm upgrade
For PTFE lined hotends only
In stock: 0
€15.90
PTFE Thermal Barrier Liner for MK10/MK11 Extruder
Fits to MK10 Extruder. 4/2mm. Lenght: 36 mm
In stock: 20
Scraper
Good to use when take off object from the build plate.
In stock: 32
€3.95
Small scraper
In stock: 9
€2.90
Vetus HRC40 Tweezers
Vetus HRC40 Tweezers.
In stock: 7
€5.90
Wanhao 2 pin female connector
2 pin female connector
In stock: 9
€4.90
Wanhao 2-Pin Male Connector
This 2-Pin connector is used to connect a fan, a heated platform bed, or a power unit to the...
In stock: 28
Wanhao 24V extruder fan D4
Fits to duplicator 4. 24V, 015A
In stock: 24
€6.90
Wanhao 24V motherboard fan
1 x Genuine Wanhao replacement cooling fan. These are fitted to all Wanhao Duplicator 4, 4X, 4S...
In stock: 60
€3.90
Wanhao 4-Pin Connector
This 4-Pin connector is used to connect your thermocouples, your (Left extruder heater and fan...
In stock: 10
Wanhao Acrylic Cover Duplicator 4 Series
Wanhao Acrylic Cover for all Wanhao Duplicator 4 models.
In stock: 11
€49
Wanhao Axis to timing pulley D4
Fits on the right side.
In stock: 5
€1.90
Wanhao Bed Screw and spring set
Wanhao Bed Screw and spring set
In stock: 16
€9.90
Wanhao Belt - Medium
Medium Belt.
In stock: 5
Wanhao Belt - Small Closed S2M-160
Small Closed Belt S2M-160
In stock: 9
Wanhao Belt - Small Closed S2M-202
Small Closed Belt S2M-202.
In stock: 33
Wanhao Belt large
Wanhao Belt large
In stock: 11
€6.90
Wanhao Belt Tension Spring
This belt tension spring delivers maximum tension to your belts on the Wanhao Duplicator 4 and 4X...
In stock: 27
Wanhao D4X Touch Panel
This touch controller replaces the touch pad found on the front of the Duplicator 4 and 4X printers.
In stock: 9
€14.90
Wanhao endstop cable
This endstop switch cable connects the Duplicator 4's (and 4X's) microcontrollers to it's endstop...
In stock: 5
€4.90
Wanhao extruder carriage D4
Plastic carriage to dual extruder on Duplicator 4/4x/4S
In stock: 7
€18
Wanhao extruder metal bar MK10
Wanhao extruder metal bar MK10
In stock: 8
€11.90
Wanhao extruder metal bar MK8/MK9
Wanhao extruder metal bar MK8/MK9.
In stock: 15
€11.90
Wanhao Filament guider D4
Wanhao Filament guider D4 fits to Duplicator 4/4X/4S.
In stock: 5
€3.90
Wanhao Flat Interface Cable
Wanhao interface cable connects the Duplicator 4's (and 4X's) Touch Controller w/ SD module to...
In stock: 10
€14.90
Wanhao Glas Plate with Clips 4X/4S
Wanhao Glas Plate with Clips
In stock: 20
€17.90
Wanhao Heat Board Cabel Set
Heat Board Cabel Set
In stock: 7
€14.90
Wanhao Heating cartridge Duplicator 4
Wanhao Heating Cartridge for Duplicator 4.
In stock: 28
€7.90
Wanhao Heating Plate 4 series
This Heated Bed Kit replaces the bed assembly on the Duplicator 4, 4X and 4S printers. Pull out...
In stock: 2
€39.90
Wanhao Hot end nozzle mounting block MK10
Wanhao Hot end nozzle mounting block.
In stock: 31
€8.90
Wanhao Hot end nozzle mounting block MK8/MK9
Wanhao Hot end nozzle mounting block
In stock: 36
€8.90
Wanhao Insulated Cover Pack MK10
Wanhao Insulated Cover Pack MK10.
In stock: 161
€0.90
Wanhao Large Spoolholder D4, D5, i3, D6
Ytterdiameter: 30mm
In stock: 24
€3.90
Wanhao LCD Screen 4x / 4s
This LCD display replaces the display found on the front of the Duplicator 4 and 4X printers.
In stock: 3
€19.90
Wanhao LCD to Touch Controller cable D4
This cable bunch connects the Duplicator 4's (and 4X's) LCD screen to the Touch Controller. This...
In stock: 10
€14.90
Wanhao LED Strip
Wanhao LED strip that fits all Wanhao Duplicator models except Duplicator 5.
In stock: 9
€9.90
Wanhao Left Rod Mount
Left mount
In stock: 2
€13
Wanhao M3x3 Grub screw
Use to hold the heating cartridge in place.
In stock: 18
€4.90
Wanhao M4x3 Grub screw
Use to hold the guiding in place.
In stock: 66
€4.90
Wanhao Mainboard DP4/4X/4S
MightyBoard is a DIY Open Source 3D Printer Control Board
In stock: 9
€139
Wanhao MK10 full set Double Extruder
New MK10 dual-extruder assembly replaces the MK9 assembly on the Duplicator 4 and 4X. Includes 2...
In stock: 2
€149
Wanhao MK10 hot end
€39.90
Wanhao MK10/MK11 guiding tube
Wanhao MK10 guiding tube
In stock: 25
€5.90
Wanhao MK10/MK11 noozle
Nozzle to MK10/MK11 Extuder.
In stock: 23
€10.90
Wanhao MK8-MK10 Drive Gear D4
Drive Gear that fits to MK8/9, MK10 extruder.
In stock: 14
€7.90
Wanhao MK8/9 nozzle
This brass extruder nozzle replaces broken, fractured, and clogged nozzles on your MK8 and MK9...
In stock: 16
€9.90
Wanhao MK9 extruder top plate cover
This Top Cover Plate fits over the MK9 dual extruder assembly on the Duplicator 4 and 4X. This...
In stock: 4
Wanhao MK9 uppgrade Kit
Wanhao MK9 uppgrade Kit
In stock: 5
€14.90
Wanhao Power Supply Unit D4 - 4X / 4S
Replacement Power Supply Unit for the Duplicator 4 and 4X.
In stock: 4
€39.90
Wanhao PTFE Thermal Barrier Liner MK8/MK9
Fits MK8 and MK9 Extruder. 3/2mm
In stock: 7
Wanhao Right Rod Mount
Right mounting
In stock: 3
€13
Wanhao Rod holder D4
Wanhao Rod holder. Fits to Duplicator D4. Made of steel.
In stock: 11
€5.90
Wanhao Stepper Motor Driver D4 - 4X / 4S
This Stepper Motor Driver with Heatsink replaces one of five drivers found on the Wanhao...
In stock: 36
€13.90
Wanhao Stop Switch for 4x/4S
1 x Genuine Wanhao replacement Endstop switch. These switches are located at the end of each axis...
In stock: 20
€11.90
Wanhao Thermocoupler Cable D4
Wanhao Thermocoupler
In stock: 31
€9.90
Wanhao Timing pulley D4
Wanhao Timing pulley
In stock: 49
Wanhao Touch panel to Duplicator 4S
Touch panel with SD card reader.
In stock: 4
€14.90
Wanhao Wire pulley
Fits to MK10 extruder.
In stock: 18
€4.90
Wanhao X/Y Stepper motor cable for D4 series
Wanhao Step motor cable.
In stock: 2
€5.90
Wanhao XY axis motor
This X & Y Axis Stepper Motor replaces those found on the Duplicator 4 and 4X printers.
In stock: 10
€24.90
Wanhao Z Axis Motor
This Z Axis stepper motor with threaded shaft replaces the motor driving the Z Axis up & down on...
In stock: 3
€49
Wanhao z-axis stepper motor cable D4
Stepper motor cable to Z-axis on Wanhao Duplicator 4 series.
In stock: 29
€5.90
På svenska In English Auf Deutsch
Prices in: 
 

Visit us on

Youtube

Contact

Box 841
245 18 STAFFANSTORP, SWEDEN

info@3dprima.com

46 40 684 97 90