(Acrylonitrile Butadiene Styrene) is a material that is widely used in both
industry and as filament for 3D Printers. It´s strong, light weight and very
durable. The well-known Lego blocks are made from ABS and as you know that is a
very high impact resistant piece of plastic and the same goes for parts printed
is a very "easy to use" material and has a matte surface finish when printed.
This ABS also has limited risk of warping when comparing to other brands of ABS.
PrimaSELECT™ABS comes in a wide range of vivid colors that are all based
on the RAL color system which in turns guarantees that you will get the same
color every time you order a new spool.
With PrimaSELECT™ABS we have succeeded in making an ABS that are very
easy to print with and gives you stunning result every time. This filament has a
very high impact strength and are perfect for printing tools, toys and different
gadgets. Thanks to the relative high melting temperature (± 103˚C)
PrimaSELECT™ABS is also suitable for prints that are going to be used in hot
environments. If you have a dual hot-end set up and are going to print with
support we recommend that you use PrimaSELECT™PVA, that bonds well to our ABS
and are easy to remove, PrimaSELECT™PVA is even soluble in water.
When printing with PrimaSELECT™ABS we recommend that you use a heated bed
to limit warping and shrinkage. Set your heat bed to ± 90-110˚C for best
sticks on BuildTak or glass plate coated with adhesive spray or glue stick.
is reeled on a transparent spool with 750 g of high quality filament. It´s
packed in a sturdy box and packed with silica gel to avoid moister.
are available in diameter sizes of 1.75 mm and 2.85 mm.
Our state of the art factory is equipped with the latest in laser
measuring technology to ensure that you will receive a spool of filament with a
tight diameter and roundness tolerance.
This in turn makes for a filament that is compatible with most common printers
on the market today.
Why should I use PrimaSELECT™ABS?
- High impact strength
- Easy to use
- Very good layer adhesion
- Higher melting point than PLA
- No hazardous fumes
- Based on RAL color system