We are listening to the voice of community! The newest Z-SUITE version 1.10 introduces the external materials feature. From now on, you will be able to experiment with 3rd parties materials. Just remember, only Zortrax Materials guarantee the best in-class printing quality.
Plug & create
No complicated calibration of the printer or software necessary. Just turn the
printer on, upload the model and start printing.
Properly selected heating and cooling points in the extruder solve the common
problem of inability to release material by the extruder. It can be caused by a
change in the physical properties of material associated with temperature.
Use of a two-part platform allows for its easy removal after the printing
process is finished. Thanks to this feature, the model can be easily removed
without causing any calibration issues. Perforations on the platform allow to
print using materials based on ABS which have a tendency to warp. They prevent
the model from peeling off during printing process. Additionally, an extra layer
of raft is used as a special base for the object. This is very important for
printing large models. The platform is heated to the correct temperature for
each type of filament. Wide range of temperatures (from 20° C to 110° C) allow
to print using many kinds of materials.
The printer is fitted with an innovative calibration system which makes sure
that the platform is leveled correctly every time. There are calibrating points
located on the platform itself which calculate its exact position. The system is
able to determine on which level the calibrating points should be located. In
the case of a slight tilt the extruder is able to adapt to the position of the
platform while it’s putting on the first layers of the model.
X and Y axis system
A system of dual X and Y axises is used to lead the extruder with high
precision. Stability and quality of printing is greatly improved through the use
of 8 smooth rods.
Single Extruder Support
Ease of use thanks to Single Extruder Support system (SES) which allows to print
support structure for complex models without the need of dual extruder and
additional material. Support structure is easy to remove and efficient. The
system is optimized to use only the exact amount of material needed to support
Print using Z-Filaments™ with features dedicated for Zortrax® M200 – results
Zortrax filament here
For even better results, don´t forget the side covers.