Fri frakt
på ordrar över 1000 SEK
Snabb leverans
1 - 2 dagar
Taulman t-glase PETT Svart 1.75mm filament

Taulman t-glase PETT Svart 1.75mm filament

Taulman T-Glase PET Co-Polymer

Ttaulman3D has released another high strength material. One for those users that print mostly with PLA or lower temperature 3D Printers. This new material is called “t-glase” (tee glass) short for tough glass.

The main features of t-glase

Strength - Specifications on the strength of t-glase will be posted as soon as the data is returned from the test labs. We have started using a local test lab along with the lab's at a few universities to accumulate data. The process involves printing several "test bars" These are bars printed at 5" x .5" x .25". The setup for printing these is 1 perimeter and 100% solid layers.

Temperature - Optimum temperature is about 212c to 224C, but will print down to 207C and up to about 235C.
NOTE: A feature of t-glase was to select a polymer that easily sticks to heated acrylic and glass print tables for the smoothest bottom surface possible. While t-glase meets this requirement, it results in a low glass transition temperature. The effects of a low TG is that parts printed in t-glase, should not be exposed to high temperature use or applications. The measured TG of t-glase is 78C.

FDA approved – t-glase is specifically made of FDA approved polymers for direct food contact/containers. This includes cups and other liquid storage parts as well as utensils. We are working with the chemical company to provide you with FDA related documentation so you may sell your printed parts that meet FDA requirements. These documents will be posted below when available.

Environmental - While t-glase is not biodegradable like PLA, it is a material that’s considered 100% reclaimable. Thus the new “struders” that convert failed prints back to usable line work perfectly with t-glase. If you have a “struder”, you can actually mix in 12% of the total weight in discarded clear water bottles. Please keep in mind, that the polymer used in most water bottles, has a slightly higher melt temp and that adding them to the mix, may increase print temp a few degrees.

Clarity – t-glase is considered colorless per industrial classifications. t-glase is considered "water clear" as it will not degrade to a color in multiple layters of applied thickness. t-glase’s clarity supports industry’s requirements for non-destructive evaluation of 3D Printed parts.

Shrinkage - Very low shrinkage makes printing large flat surfaces a breeze. And it easily prints to acrylic, glass, Kapton and other platforms.

Bridging - Those of us that have printed with acrylics and poly carbonates are always envious of their bridging capabilities due to glass temperature. And the new t-glase is very impressive at bridging.

Fumes - Unlike some lines, there are no odors or fumes when 3D Printing with t-glase.

t-glase is very strong, yet different from our nylons as it’s stiff, like PLA and ABS. And based on our first industrial trials, meets all the requirements for the three industrial customers that had an applicable need. To these customers, the clarity was a significant advantage for their quality control departments.

First, t-glase is made from the highest optical quality PETT material and is currently only available from two chemical plants. Unlike other polymers, some PETT, including t-glase are not considered “transparent”. Instead, it belongs to a group of polymers that are considered “colorless” and or “colorless with a percentage of reflectivity”. t-glase is also considered “water-clear” and “optically correct”. The term “optically correct” simply means that if you have a lens based die and injection mold precision reflective PETT into the die, the resulting lens will be relatively close to the same lens made from glass. While there is no formal definition of “water-clear”, in optical engineering, it’s a reference to how high quality plate glass seems to disappear when placed in water. When a clean piece of high quality glass is placed in water, the water negates the flat surfaces as a reflective surface, thus making the major surface invisible. However, the edges of the plate glass will still redirect or reflect light in a different direction, thus making them viewable even in water. This water-clear property is why some of products we buy are displayed in “Blister-Pack” packaging. The material is based on PETT with processing that bring out it’s reflective properties and enhances the visual presentation of the product. Over and above the problems associated with removing said product from the packaging!

Read more about Taulman T-Glass on Taulman Website here

 


Antal i lager: 11

349:-399:-


Återställd Wanhao Duplicator 4S 3D-Skrivare Svart metalllåda Dual Extruder
Refurbished products come from customer returns, demo units, transport damages, open boxes etc...
Antal i lager: 1
6 990:-7 950:-
PrimaPLA™ Filament - 3mm - 1 kg spool - Pine Green
When Quality Counts!
Antal i lager: 3
149:-299:-
PrimaABS™ Filament - 3mm - 1 kg spool - Pink
When Quality Counts!
Antal i lager: 3
149:-299:-
Föregående1234
 
eMorph is a very unique type of filament made from Polycaprolactone (PCL).
399:-
199:-
 
Myriwell 3D Penna med LCD
Myriwell 3D penna med display.
990:-
599:-
 
Taulman n-vent - 1.75mm - 450g - Svart
Taulman n-vent is a great middle ground if you are looking for something
399:-
299:-
 
Taulman n-vent - 1.75mm - 450g - Röd
Taulman n-vent is a great middle ground if you are looking for something
399:-
299:-
 
Taulman n-vent - 1.75mm - 450g - Clear
Taulman n-vent is a great middle ground if you are looking for something
399:-
299:-
 
Taulman n-vent - 1.75mm - 450g - Blå
Taulman n-vent is a great middle ground if you are looking for something
399:-
299:-
 
Taulman n-vent - 2.85mm - 450g - Svart
Taulman n-vent is a great middle ground if you are looking for something
399:-
299:-
 
 
Taulman n-vent is a great middle ground if you are looking for something
399:-
299:-
 
Taulman n-vent - 1.75mm - 450g - Grön
Taulman n-vent is a great middle ground if you are looking for something
399:-
299:-
 
Taulman n-vent - 2.85mm - 450g - Grön
Taulman n-vent is a great middle ground if you are looking for something
399:-
299:-
 
Taulman n-vent - 2.85mm - 450g - Röd
Taulman n-vent is a great middle ground if you are looking for something
399:-
299:-
 
Taulman n-vent - 2.85mm - 450g - Blå
Taulman n-vent is a great middle ground if you are looking for something
399:-
299:-
 
3D-Prima Nylon Filament - 3mm - 1 kg rulle - Vit
399:-
249:-
 
PrimaPVA™ Filament Water-Soluble - 3mm - 0.5 kg spool - Natural
PVA is a new interesting print material witch dissolves in water. Is´s great
499:-
349:-
 
3D-Prima TPE Flexible Filament - 3mm - 1 kg rulle - Gul
3D-Prima TPE Flexible filament is a special thermopolymer which allows you to
399:-
249:-
 
3D-Prima TPE Flexible Filament - 3mm - 1 kg rulle - Vit
3D-Prima TPA Flexible filament is a special thermopolymer which allows you to
399:-
249:-
 
3D-Prima TPE Flexible Filament - 3mm - 1 kg rulle - Red
3D-Prima TPE Flexible filament is a special thermopolymer which allows you to
399:-
249:-
 
3D-Prima TPE Flexible Filament - 3mm - 1 kg rulle - Grön
3D-Prima TPE Flexible filament is a special thermopolymer which allows you to
399:-
249:-
 
3D-Prima Nylon Filament - 3mm - 1 kg rulle - Natural
399:-
249:-
 
3D-Prima Nylon Filament - 3mm - 1 kg rulle - Blå
399:-
249:-
 
Föregående1234
På svenska In English Auf Deutsch
Priser i: 
 

Sociala medier

Youtube

Kontakt

Box 841
245 18 STAFFANSTORP

info@3dprima.com

+ 46 40 684 97 90