is the latest generation of high performance
material for your 3D Printer. Our PrimaSELECT™Carbon
is based on
PETG and is reinforced with 20% carbon fibers. This makes for an extremely tough
filament that is perfect for printed parts that can be used in the automotive
industry, drones and RC parts.
is a very useful material that has very unique properties.
Mixed with small, chopped carbon fiber strands,
filament offers incredible rigidity, structure, and great interlayer
adhesion. Due to the fact that there´s a very low risk of warping,
is very easy to print with and has
a matt surface when done. The finished prints are very stiff and rigid and are
very useful if you need an object with high stiffness to weight ratio.
PrimaSELECT™Carbon doesn´t require a heated bed, but if you have one, set
it to 35-60˚C to get a really good first layer adhesion.
Due to the abrasive nature of PrimaSELECT™Carbon we recommend that you
use a hardened steel nozzle for this filament. Using a regular brass nozzle
isn´t a problem but it will wear out the nozzle in a short time.
PrimaSELECT™Carbon sticks on BuildTak, Glass coated with adhesive spray or glue
stick, painters tape coated with hairspray and has been used successfully with
glue stick, 3DLac, DimaFix and Magigoo.
is reeled on a transparent spool with 500 g of high quality filament. It´s
packed in a sturdy box and packed with silica gel to avoid moister.
sticks on BuildTak or glass plate coated with adhesive spray or glue stick.
are available in diameter sizes of 1.75 mm and 2.85 mm.
Our state of the art factory is equipped with the latest in laser measuring
technology to ensure that you will receive a spool of filament with a very
tight diameter and roundness tolerance. This in turn makes for a filament that
is compatible with most common printers on the market today.
Why should I use PrimaSELECT™Carbon?
- Carbon reinforced PETG
- Easy to use, no warping and very dimensionally stable.
- Very good layer adhesion
- High impact and heat resistance
- No hazardous fumes