Fri frakt
på ordrar över 1000 SEK
Snabb leverans
1 - 2 dagar
 Wanhao Mainboard A4988 to Di3
Moderkort till Duplicator i3, i3 V 2, i3 V 2.1. Firmware är installerat på kortet.
Antal i lager: 0
790:-
1 meter insulate tape. 2,2 cm width
Protect the cables on your printer by put on insulate tape. Lengh 1 m, width 2,2 cm
Antal i lager: 69
1 meter insulate tape. 5 cm width
Protect the cables on your printer by put on insulate tape. Lengh 1 m, width 5 cm
Antal i lager: 90
3D Printer RAMPS 1.4 Control Board
The RAMPS (RepRap Arduino Mega Pololu Shield) is an all-in-one design to fit the necessary...
Antal i lager: 0
3DLAC Fästspray
3DLAC är en ny produkt med unika egenskaper. Det är ett
Antal i lager: 63
129:-
A4988 Motor driver
A4988 Motor driver
Antal i lager: 0
Anycubic 3D Printer Heated Bed Tempered Borosilicate Glass Plate 230x255x4mm for Ultimaker 2
Anycubic 3D Printer Heated Bed Tempered Borosilicate Glass Plate 230x255x4mm for Ultimaker 2
Antal i lager: 2
199:-
Anycubic Heated Bed Tempered Borosilicate Glass Plate for 3D Printers 200mm x 221,4mm x 3mm
Anycubic Heated Bed Tempered Borosilicate Glass Plate for 3D Printers 200mm x 221,4mm x 3mm
Antal i lager: 0
199:-
APrintaPro - PrintaKit
ALL THE RIGHT TOOLS IN A BOX!
Antal i lager: 0
795:-
BCN Sigma Nozzle 0,4 mm
Complete hot end with nozzle that fits to BCN Sigma. 0,4mm
Antal i lager: 0
499:-
BCN Sigma Nozzle 0,6 mm
Complete hot end with nozzle that fits to BCN Sigma. 0,6mm
Antal i lager: 0
499:-
Blow Radial Cooling Fan
DC Brushless fan. 12 V, 0,12A.
Antal i lager: 0
Bondtech Extruder Mini for Wanhao i3
Bondtech Mini with Dual-Drive gears that grips the filament from both sides
Antal i lager: 4
990:-
BondTech Extruderbracket for Wanhao i3
This custom bracket for mounting the Bondtech Mini onto the Wanhao I3 printer
Antal i lager: 13
195:-
BuildTak 3D Print Surface
Product Detail and Information
Antal i lager: 1216
BuildTak Spatel
This tool has been developed specifically for the FFF 3D printing world. It features a durable...
Antal i lager: 0
219:-
Cooling fan 30x30x10
Cooling fan 30x30x10, 300 mm cable, DC 12 v, 0,09A.
Antal i lager: 4
Cooling fan 40x40x10
Cooling fan with 140 mm cable. DC 12 V, 0,065A +-10%
Antal i lager: 13
CraftBot Byggplatta
Byggplatta med kaptobtejp som passar till CraftBot, CraftBot Plus.
Antal i lager: 0
299:-
CraftBot Cables in energy chain
Kabelset i energilänk som passar till CraftBot, CraftBot Plus. Fullt kabelset till hela extrudern.
Antal i lager: 0
379:-
CraftBot Filament spolhållare
Spolhållare som passar till CraftBot, CraftBot Plus. Enkel att montera. Det går att montera flera...
Antal i lager: 1
299:-
CraftBot Hot end
Hot End som passar till CraftBot, CraftBot Plus.
Antal i lager: 0
649:-
CraftBot kylfläkt set
Kylfläkt sätt som passar till CraftBot, CraftBot Plus.
Antal i lager: 1
229:-
Craftbot Moderkort
Moderkort till Craftbot, Craftbot plus.
Antal i lager: 1
1 349:-
CraftBot Nozzle
Nozzle till Craftbot, Craftbotplus. Nozzle diameter 0,4 mm.
Antal i lager: 0
CraftBot Timing belts
GT2 Timing belts som passar till CraftBot, CraftBot Plus.
Antal i lager: 2
169:-
CreatBot 30x30 fan
CreatBot 30x30x10 fan. Some models use this smaller fan on to cool the hot-end. 12 Volt
Antal i lager: 7
CreatBot adhisive sheet
Adhisive sheet from CreatBot. 460 x 355 mm
Antal i lager: 4
299:-
CreatBot Adjusting Column
Antal i lager: 14
119:-
CreatBot Brass Nozzle 0.4mm V2
This is the version 2 of nozzle and for this you need to have the version 2 of the heat break.
Antal i lager: 21
229:-
CreatBot Brass Nozzle 0.6mm V2
This is the version 2 of nozzle and for this you need to have the version 2 of the heat break.
Antal i lager: 8
229:-
CreatBot Cooling fin
Antal i lager: 6
119:-
CreatBot Double Tube Connector with Push-fitting
CreatBot Double Tube Connector with Push-fitting that fits on CreatBot D600.
Antal i lager: 3
159:-
CreatBot Extruder motor 1/L
CreatBot Extruder motor 1/L
Antal i lager: 1
599:-
CreatBot Extruder motor 2/R
CreatBot Extruder motor 2/R with drive gear.
Antal i lager: 1
599:-
CreatBot Heat Block R
Antal i lager: 15
CreatBot Heatbreak V1
Antal i lager: 9
119:-
CreatBot Heatbreak V2
Heatbreak version 2 that fits on CreatBot 3D printers.
Antal i lager: 20
119:-
CreatBot Keyboard
Antal i lager: 1
299:-
CreatBot Rear Filament cooling fan
CreatBot Rear Filament cooling fan
Antal i lager: 6
129:-
CreatBot Stainless steel Nozzle 0.4 mm V2
Nozzle is stainless steel 0.4mm
Antal i lager: 3
229:-
CreatBot Stainless steel Nozzle 0.6 mm V2
CreatBot Stainless steel Nozzle 0.6 mm V2
Antal i lager: 7
229:-
CreatBot Stepper motor driver
CreatBot Stepper motor driver
Antal i lager: 8
129:-
CreatBot Teflon Tube
Antal i lager: 12
CreatBot Thermistor with full length cable
CreatBot Thermistor with full length cable
Antal i lager: 14
159:-
CreatBot Thermocoupler
Antal i lager: 0
149:-
CreatBot Thumb nuts and springs
CreatBot Thumb nuts and springs to the build platform.
Antal i lager: 2
CreatBot Y-axis stop swtich
179:-
daVinci Junior Replacement Extruder 0,3mm
Quick Release Extruder for da Vinci Jr. 1.0 - 0.3 mm.
Antal i lager: 1
990:-
daVinci Junior Replacement Extruder 0,4mm
Quick Release Extruder for da Vinci Jr. 1.0 WiFi
Antal i lager: 0
890:-
Doodle3D Wifi-Box
Doodle3D är ett tillbehör till 3D-skrivaren som gör att man kan koppla en
Antal i lager: 0
1 244:-
Drive gear
Drive gear. 12x10,90 mm
Antal i lager: 2
Extruder Drive Upgrade
Uppgradering av mataren till Ultimaker Original.
Antal i lager: 0
274:-
Extruder for da XYZ da Vinci Pro
Replacement extruder for da Vinci Pro printers
Antal i lager: 0
990:-
Filament Nipper
Smaller nipper that is perfect to cut of the filament with.
Antal i lager: 0
Flashforge  Y/X -axel stoppgivare
Y/X-axel Stoppgivare som passar Creator Pro och dreamer.
Antal i lager: 8
Flashforge 0.4 Nozzle
0.4 mm munstyckeUppdaterad version
Antal i lager: 10
179:-
Flashforge Core Board to Dreamer
Passar till Flashforge Dreamer
Antal i lager: 0
790:-
Flashforge Driver board
Passar till Flashforge Dreamer
Antal i lager: 3
790:-
Flashforge Extruder Aluminum Block
Flashforge Extruder Aluminum Block. Passar de uppdaterade munstyckena.
Antal i lager: 6
199:-
Flashforge Extruder Assembly to Creator Pro
Flashforge Extruder Assembly to Creator Pro
Antal i lager: 3
990:-
Flashforge Extruder Assembly to Dreamer
Flashforge Extruder Assembly to Dreamer
Antal i lager: 0
990:-
Flashforge Extruder fläkt till Creator Pro
Passar till Creator Pro
Antal i lager: 0
Flashforge Extruder fläkt till Dreamer
Passar till Dreamer.
Antal i lager: 5
Flashforge Extruder Turbo Fläkt
Turbofläkt för att kyla PLA. *Inkluderar ej monteringsfäste. 50x50x15
Antal i lager: 8
139:-
Flashforge Filament feeder gear
Fits inside the extruder to feed feed filament.
Antal i lager: 26
Flashforge Flat cable till Creator Pro
Flashforge Flat cable som passar till Creator Pro
Antal i lager: 4
Flashforge kabelset till värmeplattan
Kabel mellan moderkort och värmeplatta. 2 + 4 pin som passar till Flashforge Creator Pro och...
Antal i lager: 13
Flashforge LCD skärm och knappanel
Flashforge LCD screen, SD reader and button panel that fits to Creator Pro.
Antal i lager: 0
599:-
Flashforge Moderkort till Creator Pro
Moderkort som passar till Flashforge Creator Pro.
Antal i lager: 0
1 490:-
Flashforge Nätaggregat
Flashforge nätaggregat
Antal i lager: 8
399:-
Flashforge PTFE tub
Passar de uppdaterade munstyckena.
Antal i lager: 0
Flashforge stegmotorkabel till Creator Pro
Kabel mellan moderkort och stegmotor. Passar till Flashforge Creator Pro.
Antal i lager: 0
Flashforge stegmotorkabel till Dreamer
Kabel mellan moderkort och x-axeln stegmotor. passar till Dreamer
Antal i lager: 18
Flashforge stepper motor driver
Stepper motor driver that fits to the main board on Creator pro.
Antal i lager: 6
139:-
Flashforge Stoppgivarkabel till Creator Pro
Stoppgivarkabel som passar till Flashforge Creator Pro.
Antal i lager: 9
Flashforge Stoppgivarkabel till Dreamer
Stoppgivarkabel som passar till Flashforge Dreamer.
Antal i lager: 18
Flashforge Temperaturgivare till Creator Pro
Temperaturgivare till Flashforge Creator pro.
Antal i lager: 7
149:-
Flashforge temperaturgivare till Dreamer
Passar till Dreamer
Antal i lager: 8
129:-
Flashforge Touch Screen to Dreamer
Pekskärm som passar till Flashforge Dreamer.
Antal i lager: 2
549:-
Flashforge värmepatron till Creator Pro
Passar till Flashforge Creator Pro.
Antal i lager: 7
169:-
Flashforge värmepatron till Dreamer
Passar till Flashforge Dreamer.
Antal i lager: 7
169:-
Flashforge värmeplatta
Värmeplatta som passar till Flashforge Creator Pro och Dreamer.
Antal i lager: 0
490:-
Flashforge WiFi adapter
Passar till Dreamer
Antal i lager: 3
690:-
Flashforge Y-axel stegmotorhållare
Monteringsfäste för y-axelns stegmotor. Passar till Flashforge dreamer och Flashforge Creator Pro.
Antal i lager: 8
Heated Bed Upgrade Kit
Nu kan du få fördelarna av en uppvärmd utskriftsplattform även på din
Antal i lager: 0
2 995:-
Heater ceramic cartridge  12/40
Heater ceramic cartridge. 12 V, 40 W. 20 mm x 6 mm. 1 meter cable.
Antal i lager: 8
IGUS DRYLIN RJ4JP-01-08 5-pack
Runs smooth with less noise. Without balls, entirely in polymere, this component can work without...
Antal i lager: 44
Knurled drive bolt kit V3
Den senaste versionen av drivskruven till mataren i Ultimaker Original. Ibland kan det hända att...
Antal i lager: 0
194:-
Limonene - solvant for HIPS 1 liter
LIMONENE is the perfect solvent for anyone wanting to print support heavy multi extrusion 3D...
Antal i lager: 0
MAGIGOO-fästpenna
MAGIGOO is an easy to use 3D printing adhesive designed to address ‘the first
Antal i lager: 79
159:-
Mega 2560 R3 Mega2560 REV3 ATmega2560-16AU Board ATMega 2560 + USB Cable compatible for arduino
Arduino follows Open-source principles, which means you can freely download the development...
Antal i lager: 0
159:-
Micro Swiss - 0.4 mm -nozzle for MK10 All Metal Hotend ONLY A2 - Hardened Steel
This is Micro Swiss MK10 All Metal Hotend
Antal i lager: 4
220:-
Micro Swiss - 0.5 mm -nozzle for MK10 All Metal Hotend ONLY A2 - Hardened Steel
This is Micro Swiss MK10 All Metal Hotend
Antal i lager: 0
220:-
Micro Swiss - 0.6 mm -nozzle for MK10 All Metal Hotend ONLY A2 - Hardened Steel
This is Micro Swiss MK10 All Metal Hotend
Antal i lager: 0
220:-
Micro Swiss - All Metal Hotend 0.4 mm with SLOTTED Cooling Block for Duplicator 6
This is Micro Swiss All Metal Hotend kit for Wanhao Duplicator 6 with the
Antal i lager: 3
649:-
Micro Swiss - MK8 Plated Wear Resistant Nozzle 0.2 mm
This is MK8 style nozzle, it is made from
Antal i lager: 0
159:-
Micro Swiss - MK8 Plated Wear Resistant Nozzle 0.6 mm
This is MK8 style nozzle, it is made from
Antal i lager: 0
159:-
Micro Swiss - Plated Wear Resistant Nozzle Duplicator 5 Series .4mm
This is Micro Swiss Plated nozzle for WANHAO Duplicator 5 Series, it is made from a 360 brass...
Antal i lager: 0
220:-
Micro Swiss - Plated Wear Resistant Nozzle Duplicator 5 Series .6mm
This is Micro Swiss Plated nozzle for WANHAO Duplicator 5 Series, it is made from a 360 brass...
Antal i lager: 8
220:-
Micro Swiss - Plated Wear Resistant Nozzle Duplicator 5 Series .8mm
This is Micro Swiss Plated nozzle for WANHAO Duplicator 5 Series, it is made from a 360 brass...
Antal i lager: 3
220:-
Micro Swiss - Plated Wear Resistant Nozzle for Zortrax M200
This nozzle will fit Zortrax M200, Afinia
Antal i lager: 29
199:-
Micro Swiss -All Metal Hotend with SLOTTED block for Wanhao i3 0.4mm
All Metal Hotend w/ SLOTTED cooling for Wanhao i3
Antal i lager: 19
549:-
Micro Swiss 0.2 mm Nozzle for MK10 Allmetal Hotend Kit
This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit
Antal i lager: 13
199:-
Micro Swiss 0.3 mm Nozzle for MK10 Allmetal Hotend Kit
This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit
Antal i lager: 7
199:-
Micro Swiss 0.4 mm Nozzle for MK10 Allmetal Hotend Kit
This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit
Antal i lager: 25
199:-
Micro Swiss 0.6 mm Nozzle for MK10 Allmetal Hotend Kit
This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit
Antal i lager: 25
199:-
Micro Swiss CNC Machined Lever for Wanhao i3 extruder
This is a replacement lever for Wanhao i3 and all of its 
Antal i lager: 17
249:-
Micro Swiss cooling block upgrade for Wanhao i3
Wanhao i3 Slotted cooling block
Antal i lager: 1
249:-
Micro Swiss MK10 .4 mm All M​etal Hotend Kit
This is an all metal hotend upgrade kit
Antal i lager: 0
399:-
Micro Swiss MK10 Nozzle 0.4mm upgrade
For PTFE lined hotends only
Antal i lager: 3
169:-
Micro Swiss MK8 0.4mm nozzle upgrade
This is MK8 style nozzle, it is made from a 360 brass base material and plated
Antal i lager: 14
159:-
Micro Swiss Nozzle for Ultimaker2+ 0.25mm
This is RepRap style nozzle, it is made
Antal i lager: 3
199:-
Micro Swiss Nozzle for Ultimaker2+ 0.3mm
This is RepRap style nozzle, it is made
Antal i lager: 17
199:-
Micro Swiss Nozzle for Ultimaker2+ 0.4mm
This is RepRap style nozzle, it is made
Antal i lager: 9
199:-
Micro Swiss Nozzle for Ultimaker2+ 0.6mm
This is RepRap style nozzle, it is made
Antal i lager: 12
199:-
Micro Swiss Nozzle for Ultimaker2+ 0.8mm
This is RepRap style nozzle, it is made
Antal i lager: 7
199:-
MK 8 Drive gear
MK 8 Drive gear
Antal i lager: 6
Nema 17 Stepper motor
Anycubic Nema 17 Stepper Motor Bipolar 1.5A 40Ncm/57.1oz.in 4 Leads for 3D Printer or CNC Parts
Antal i lager: 2
129:-
P120 Enkel extruder
Enkel extruder som passar till PrimaCreator P120.
Antal i lager: 20
390:-
P120 Extruder feeder
Arm som trycker mot matningshjulet för att mata ner filament ner till munstycket. Passar på...
Antal i lager: 5
P120 Extruder fläkt 30*30*10
Fläkt som kyler extrudern på PrimaCreator P120. 30*30*10. 12 Volt.
Antal i lager: 20
P120 Filament-guideslang
Filament-guidetube som passar till primaCreator P120.
Antal i lager: 10
P120 Guiding tube
Metalldelen som leder filament genom värmeblocket på PrimaCreator P120.
Antal i lager: 20
P120 LCD med wifi
LCD med wifi som passar till PrimaCreator P120.
Antal i lager: 5
459:-
P120 Matningshjul för extruder
Hjul som matar filament genom extrudern på PrimaCreator P120.
Antal i lager: 20
P120 Micro SD 1 GB
P120 Micro SD 1 GB.
Antal i lager: 10
P120 Moderkort
Moderkort som passar till PrimaCreator P120.
Antal i lager: 5
890:-
P120 Munstycke 0.4 mm
Munstycke som passar till PrimaCreator P120. 0.4 mm
Antal i lager: 40
P120 Nätdel och kabel
Antal i lager: 5
349:-
P120 Pneumatisk koppling
P120 Pneumatisk koppling aom passar till PrimaCreator P120.
Antal i lager: 20
P120 Set med drivhjul
Set med drivhjul för PrimaCreator P120. Set med 5 hjul.
Antal i lager: 5
P120 Set med drivremmar
Set med drivremmar som passar till X och Y axeln på PrimaCreator P120. Set med 2 remmar.
Antal i lager: 5
159:-
P120 Set med stoppgivare
Paket med stoppgivare för X/Y/Z på PrimaCreator P120.
Antal i lager: 10
P120 Stegmotor för Z axel
Stegmotor för Z-axel på PrimaCreator P120.
Antal i lager: 5
249:-
P120 Temperatursensor för extruder
Sensor som mäter extruder temperaturen på PrimaCreator P120.
Antal i lager: 15
129:-
P120 Värmeblock
Värmeblock som passar till PrimaCreator P120.
Antal i lager: 20
P120 Värmeplatta
Värmeplatta som passar till PrimaCreator P120.
Antal i lager: 5
199:-
P120 Värmetub
Värmetub som används för att smälta filament. Passar till PrimaCreator P120. 12V 40W
Antal i lager: 20
P120 X/Y/E Stegmotor
Stegmotor som passar till X-axel, Y-Axel samt extruder på PrimaCreator P120.
Antal i lager: 5
249:-
Perforated Plate V2
Perforated plate mounted on heatbed. This new version is thicker and more stable in order to...
Antal i lager: 0
650:-
Plastskrapa
Skonsam plastskrapa för att avlägsna utskrivna objekt från byggplatta.
Antal i lager: 20
34,90
Polyimide Tape Heat Resistant Bred 100mm x 32m
En bred Polyimide tejp som är perfekt att täcka den
Antal i lager: 6
299:-
Polyimide Tape Heat Resistant Extra Superbred 200mm x 32m
En extra bred Polyimide tejp som är perfekt att täcka den
Antal i lager: 31
399:-
PrimaFil PEI Sheet 203x203mm-0,8mm
PEI
Antal i lager: 1657
119:-
Print Bed for da Vinci 1.0 Pro, 3-in-1 Pro
Print Bed for da Vinci 1.0 Pro, 3-in-1 Pro
Antal i lager: 0
990:-
Print bed for da Vinci 1.0A, 1.0, 1.0SA, 1.1
Part nr RS10XXY139B
Antal i lager: 1
690:-
Print bed for da Vinci 2.0
Part nr: RS10XXY140F
Antal i lager: 1
890:-
PrintaFix Basic
PrintaFix - the
Antal i lager: 86
169:-
PTFE Thermal Barrier Liner for MK10/MK11 Extruder
Passar till MK10 Extruder. 4/2mm. Längd: 36 mm
Antal i lager: 25
Raise 3D A4988 Stepper Driver
Raise 3D A4988 Stepper Driver..
Antal i lager: 32
Raise 3D Cooling fan
Antal i lager: 19
Raise 3D End stop switch
Raise 3D End stop switch
Antal i lager: 3
179:-
Raise 3D Extruder connector board
Raise 3D Extruder connector board
Antal i lager: 1
590:-
Raise 3D Glass plate N1 series
High Temperature Build Plate for N1 series
Antal i lager: 11
199:-
Raise 3D Glass plate N2/N2 Plus
High Temperature Build Plate for N2/N2 Plus
Antal i lager: 0
299:-
Raise 3D Heated Bed Power Fuse
Raise 3D Heated Bed Power Fuse
Antal i lager: 6
14,90
Raise 3D Heating cartridge
Fits to N1, N2 and N2 plus.
Antal i lager: 0
Raise 3D Hotend assembly V2
Raise 3D Hotend assembly that fits to N1, N2 and N2 plus. V2
Antal i lager: 0
990:-
Raise 3D Main System Power Fuse
Raise 3D Main System Power Fuse
Antal i lager: 7
14,90
Raise 3D Motion Controller Board
Raise 3D Motion Controller Board. There are no stepper motors included.
Antal i lager: 0
1 390:-
Raise 3D PTFE Tube
Fits to N1, N2 and N2 Plus
Antal i lager: 1
149:-
Raise 3D Quick coupler
Raise 3D Quick coupler
Antal i lager: 5
Raise 3D Thermistor to F series
Fits to Raise 3D F series
Antal i lager: 10
Raise 3D Thermocoupler N2/N2 Plus
Thermocoupler that fits to Raise 3D N2 and N2 Plus.
Antal i lager: 0
Raise 3D Thermocoupler/Temperature Sensor N1
Raise 3D Thermocoupler/Temperature Sensor that fits to N1.
Antal i lager: 9
Raise 3D Trinamic TMC2100 Silent Stepper Driver
Raise 3D Trinamic TMC2100 Silent Stepper Driver.
Antal i lager: 6
279:-
Raise 3D V2 Brass Nozzle
Brass Nozzle, version 2. 0.4 mm.
Antal i lager: 0
219,50
Raise 3D V2H Nozzle 0,2mm
This nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad...
Antal i lager: 2
249:-
Raise 3D V2H Nozzle 0,4mm
This nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad...
Antal i lager: 0
249:-
Raise 3D V2H Nozzle 0,6mm
This nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad...
Antal i lager: 0
249:-
Raise 3D V2H Nozzle 0,8mm
This nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad...
Antal i lager: 3
249:-
Replacement Dual Nozzle for da Vinci
Part no: RS10XXY138D
Antal i lager: 0
1 390:-
Replacement Dual Nozzle for da Vinci 2.0A works with PVA
Quick Release Extruder for da Vinci 2.0 Duo COMPATIBLE WITH PVA (water-soluble) Filament
Antal i lager: 3
1 590:-
Replacement Single Nozzle for da Vinci 1.0
Replacement Single Nozzle for da Vinci 1.0
Antal i lager: 0
890:-
Second nozzle for Vertex K8400 3D Printer
Contains all necessary parts to convert your single extruder Vertex 3D Printer
Antal i lager: 0
1 390:-
Side covers for Zortrax M200
Side covers for Zortrax M200.
Antal i lager: 8
990:-
Small scraper
Antal i lager: 0
Taulman ComPlete Nylon Glue
219:-
Thermocouple cable
Thermocouple cable 4x1500 mm
Antal i lager: 2
UltiController Kit
UltiControllern gör att skrivaren inte längre behöver vara kopplad till en dator. Detta kan vara...
Antal i lager: 0
994:-
Ultimaker - Bowden Tube
67cm lång Bowden-tub tillverkad av PFA. Yttre diameter 0.25 tum, inre diameter 0.125 tum.
Antal i lager: 0
229:-
Ultimaker - Extrusion Upgrade Kit - U2 to U2+
Detta nya uppgraderingskit gör att du kan uppgradera din Ultimaker 2 till en
Antal i lager: 0
4 937:-
Antal i lager: 0
368,75
Antal i lager: 0
228,75
Antal i lager: 0
12,50
Antal i lager: 2
368,75
Ultimaker 2 - Heated Bed
Detta är endast själva värmeelementet. Glasbädd och övriga delar ingår ej, endast det som syns på...
Antal i lager: 4
1 869:-
Ultimaker 2 - Heater Cartridge
Heater Cartridge för Ultimaker2.
Antal i lager: 2
440:-
Ultimaker 2 - Hot End Isolator
Denna del kopplar samman delarna "PTFE coupler" och "nozzle + heater block" på skrivaren.
Antal i lager: 0
345:-
Ultimaker 2 - Hot end Pack
The integrated nozzle + heater block
Antal i lager: 0
865:-
Ultimaker 2 - Print Table Glass
Glasplatta till plattformen på Ultimaker2.
Antal i lager: 0
365:-
Ultimaker 2 - PT100 B sensor
Temperatursensor för Ultimaker2 hot end.
Antal i lager: 0
465:-
Ultimaker 2 - PTFE Coupler
PTFE coupler för Ultimaker2.
Antal i lager: 3
185:-
Nozzle som passar till The Olsson block. 0.40 mm.
Antal i lager: 3
119:-
Ultimaker Original - Aluminum Heater Block
Aluminum Heater BlockAlso included in the Hot End v2 bundle. ONLY compatible with the Ultimaker...
Antal i lager: 0
185:-
Ultimaker Original - Arduino Mega 2560
Arduino Mega 2560 utvecklingskort.
Antal i lager: 0
525:-
Ultimaker Original - Belts Pack
This product is compatible with the complete Ultimaker Original and the Ultimaker Original+.
Antal i lager: 0
249:-
Ultimaker Original - Build Platform Acryllic
Byggplatta för Ultimaker Original rev. 3
Antal i lager: 0
315:-
Ultimaker Original - Fan Pack
Fläkt-kit till Ultimaker Original.
Antal i lager: 5
270:-
Ultimaker Original - Fully assembled electronics
All elektronik som krävs för att driva skrivaren. Inkluderar Arduino och 4st stegmotordrivare.
Antal i lager: 0
2 440:-
Ultimaker Original - Heater Cartridge
Värmepatron för att värma upp skrivarhuvudet.
Antal i lager: 0
410:-
Ultimaker Original - Hot End Isolator Coupler
Hot End Isolator Coupler
Antal i lager: 0
185:-
Ultimaker Original - Hot End Isolator Tube
Denna del är också inkluderad i Hot End v2 bundle. Kompatibel med Ultimaker Original och Original+.
Antal i lager: 0
185:-
Ultimaker Original - Hot End Pack
The hot end bundle is fool proof when assembling. There is only one way to assemble it, no (more)...
Antal i lager: 0
700:-
Ultimaker Original - Microswitch Pack
Microswitch Pack
Antal i lager: 0
185:-
Ultimaker Original - Nozzle
Munstycke 0.4mm. Denna del är också inkluderad i Hot End v2 bundle. Munstycket är kompatibelt med...
Antal i lager: 2
185:-
Ultimaker Original - Peek Isolator
Av formsprutad glasfiberfylld PEEK. Används i skrivarhuvudet för värmeisolering.
Antal i lager: 0
175:-
Ultimaker Original - Power Adapter
Nätaggregat för Ultimaker Original.
Antal i lager: 0
625:-
Ultimaker Original - Print Head Hot End Holder
Aluminiumplatta för montering av hotend.
Antal i lager: 0
150:-
Ultimaker Original - Stepper Driver
Stegmotordrivare.
Antal i lager: 0
180:-
Ultimaker Original - Thermocouple Sensor
Temperatursensor.
Antal i lager: 0
325:-
Ultimaker Original - Thermocouple Transmitter
Hämtar in och skickar temperaturinformation till kontrollkortet.
Antal i lager: 0
355:-
Ultimaker Original - Timing Pulley 5mm Shaft Pack
2st kuggremshjul och skruvar till X- och Y-motor.
Antal i lager: 0
185:-
Ultimaker Original - Timing Pulley 8mm Shaft Pack
Timing Pulley 8mm Shaft Pack
Antal i lager: 0
625:-
Vetus HRC40 Tweezers
Verktyg för 3D-printing. Perfekt att pilla bort support material med.
Antal i lager: 26
Wanhao 2 pin female connector
2 pin female connector
Antal i lager: 0
Wanhao 2-Pin Male Connector
This 2-Pin connector is used to connect a fan, a heated platform bed, or a power unit to the...
Antal i lager: 8
Wanhao 24V extruder fläkt D4
Passar till Duplicator 4 seriens extruder.
Antal i lager: 29
Wanhao 24V moderkort fläkt
1 st Wanhao kylfläkt. Dessa fläktar passar till Wanhao Duplicator 4 serien. Denna fläkt är en...
Antal i lager: 58
Wanhao 4-Pin Connector
This 4-Pin connector is used to connect your thermocouples, your (Left extruder heater and fan...
Antal i lager: 9
Wanhao Acrylic Cover Duplicator 4 Series
Wanhao Acrylic Cover for all Wanhao Duplicator 4 models.
Antal i lager: 11
490:-
Wanhao Acrylic Cover to Duplicator 5S Mini
Sidopaneler och dörrar som passar till Duplicator 5S Mini. Enkel montering med magneter.
Antal i lager: 15
790:-
Wanhao Aluminium base plate
Wanhao Aluminium base plate that fits to Duplicator i3.
Antal i lager: 0
149:-
Wanhao Axel till drivhjul  D4
Passar på höger sida.
Antal i lager: 4
Wanhao Bearing to D5
Bearings that fits inside the print head to Duplicator 5 series. Comes in a bag with two bearings.
Antal i lager: 10
Wanhao Bed Screw and spring set
Wanhao Bed Screw and spring set
Antal i lager: 14
Wanhao Belt - Medium
Medium Belt.
Antal i lager: 0
Wanhao Belt - Small Closed S2M-160
Small Closed Belt S2M-160
Antal i lager: 8
Wanhao Belt - Small Closed S2M-202
Small Closed Belt S2M-202.
Antal i lager: 28
Wanhao Belt large
Wanhao Belt large
Antal i lager: 1
Wanhao Belt Tension Spring
This belt tension spring delivers maximum tension to your belts on the Wanhao Duplicator 4 and 4X...
Antal i lager: 16
Wanhao Bracket to Z rods
This bracket holds the two Z rods in place. One bracket per package.
Antal i lager: 5
Wanhao Build Plate for 5/5S/5SMini
Build Plate to Dulicator 5S Mini, 5S and 5
Antal i lager: 1
690:-
Wanhao Build surface
Fits to Duplicator i3 2.1, i3 Plus and Duplicator 6.
Antal i lager: 0
125:-
Wanhao D4 Z guide rods
This rods works as guiding rods to the z axis on Duplicator 4S.
199:-
Wanhao D4X Touch Panel
This touch controller replaces the touch pad found on the front of the Duplicator 4 and 4X printers.
Antal i lager: 2
149:-
Wanhao D6 20-2GT Timing pulley
Wanhao D6 20-2GT Timing pulley. Fits to 8 mm rods.
På svenska In English Auf Deutsch
Priser i: 
 

Sociala medier

Youtube

Kontakt

Box 841
245 18 STAFFANSTORP

info@3dprima.com

+ 46 40 684 97 90