Fri frakt
på ordrar över 1000 SEK
Snabb leverans
1 - 2 dagar
CreatBot 30x30 fan
CreatBot 30x30x10 fan. Some models use this smaller fan on to cool the hot-end. 12 Volt
Antal i lager: 8
CreatBot adhisive sheet
Adhisive sheet from CreatBot. 460 x 355 mm
Antal i lager: 5
299:-
CreatBot Adjusting Column
Antal i lager: 5
119:-
CreatBot Brass Nozzle 0.4mm V2
This is the version 2 of nozzle and for this you need to have the version 2 of the heat break.
Antal i lager: 5
229:-
CreatBot Brass Nozzle 0.6mm V2
This is the version 2 of nozzle and for this you need to have the version 2 of the heat break.
Antal i lager: 5
229:-
CreatBot Cooling fin
Antal i lager: 9
119:-
CreatBot Extruder motor 1/L
CreatBot Extruder motor 1/L
Antal i lager: 1
599:-
CreatBot Extruder motor 2/R
CreatBot Extruder motor 2/R with drive gear.
Antal i lager: 1
599:-
CreatBot Fanset
Antal i lager: 3
199:-
CreatBot Heat Block L
Antal i lager: 6
CreatBot Keyboard
Antal i lager: 2
299:-
CreatBot Rear Filament cooling fan
CreatBot Rear Filament cooling fan
Antal i lager: 3
129:-
CreatBot Stepper motor driver
CreatBot Stepper motor driver
Antal i lager: 10
129:-
CreatBot Teflon Tube
Antal i lager: 15
CreatBot Thermistor with full length cable
CreatBot Thermistor with full length cable
Antal i lager: 3
159:-
CreatBot Thermocoupler
Antal i lager: 2
149:-
CreatBot Thumb nuts and springs
CreatBot Thumb nuts and springs to the build platform.
Antal i lager: 3
CreatBot X-axis stop swtich
179:-
CreatBot Y-axis stop swtich
179:-
Filament Nipper
Smaller nipper that is perfect to cut of the filament with.
Antal i lager: 22
 
På svenska In English Auf Deutsch
Priser i: 
 

Sociala medier

Youtube

Kontakt

Box 841
245 18 STAFFANSTORP

info@3dprima.com

+ 46 40 684 97 90