Fri frakt
på ordrar över 1000 SEK
Snabb leverans
1 - 2 dagar
1 meter insulate tape. 2,2 cm width
Protect the cables on your printer by put on insulate tape. Lengh 1 m, width 2,2 cm
Antal i lager: 69
1 meter insulate tape. 5 cm width
Protect the cables on your printer by put on insulate tape. Lengh 1 m, width 5 cm
Antal i lager: 90
Filament Nipper
Smaller nipper that is perfect to cut of the filament with.
Antal i lager: 0
Micro Swiss - 0.4 mm -nozzle for MK10 All Metal Hotend ONLY A2 - Hardened Steel
This is Micro Swiss MK10 All Metal Hotend
Antal i lager: 4
220:-
Micro Swiss - 0.5 mm -nozzle for MK10 All Metal Hotend ONLY A2 - Hardened Steel
This is Micro Swiss MK10 All Metal Hotend
Antal i lager: 0
220:-
Micro Swiss - 0.6 mm -nozzle for MK10 All Metal Hotend ONLY A2 - Hardened Steel
This is Micro Swiss MK10 All Metal Hotend
Antal i lager: 0
220:-
Micro Swiss - All Metal Hotend 0.4 mm with SLOTTED Cooling Block for Duplicator 6
This is Micro Swiss All Metal Hotend kit for Wanhao Duplicator 6 with the
Antal i lager: 3
649:-
PTFE Thermal Barrier Liner for MK10/MK11 Extruder
Passar till MK10 Extruder. 4/2mm. Längd: 36 mm
Antal i lager: 25
Small scraper
Antal i lager: 0
Wanhao Build surface
Fits to Duplicator i3 2.1, i3 Plus and Duplicator 6.
Antal i lager: 0
125:-
Wanhao D6 Track Aluminum Block 1_V02
Wanhao D6 Track Aluminum Block 1_V02
Wanhao D6 Track aluminum block 2
Fits on Wanhao Duplicator 6
Antal i lager: 6
129:-
Wanhao D6 Track Aluminum Block 2_V02
Wanhao D6 Track Aluminum Block 2_V02
Antal i lager: 6
129:-
Wanhao D6 Track Aluminum block 3
Wanhao D6 Track Aluminum block 3
Wanhao D6-MK11 Extruder cooling fin
Wanhao D6-MK11 Extruder cooling fin.
Antal i lager: 1
129:-
Wanhao D6, I3PLUS 350W, 24V PSU, power supply unit.
D6, I3PLUS 350W, 24V PSU, power supply unit.
Antal i lager: 1
399:-
Wanhao D6/ i3 Plus ribbon cable stiffen plastic
Use for make flat cable more stiff. Width: 20 mm
Antal i lager: 4
Wanhao Drill 0,4 mm
Drill that can be used for clean 0,4 nozzle. Use this very careful though it can brake inside the...
Antal i lager: 0
14,90
Wanhao End stop cable D6
End stop cable without switch that fits to Duplicator 6.
Antal i lager: 8
Wanhao MK10 Drive Gear to Duplicator i3 Plus/D6
Drive Gear som passar till MK10 extruder. Passar till extrudern på Duplicator i3 Plus och...
Antal i lager: 6
Wanhao MK10/MK11 guiding tube
Wanhao MK10 guiding tube
Antal i lager: 9
Wanhao MK10/MK11 noozle
Nozzle to MK10/MK11 Extuder.
Antal i lager: 34
110:-
Wanhao Moderkort Duplicator 6
1 390:-
Wanhao plastic bearing D6
Fits to Duplicator 6 X axis
Antal i lager: 0
Stegmotor som passar till X/Y axeln på Duplicator 6.
219:-
På svenska In English Auf Deutsch
Priser i: 
 

Sociala medier

Youtube

Kontakt

Box 841
245 18 STAFFANSTORP

info@3dprima.com

+ 46 40 684 97 90