Fri frakt
på ordrar över 1000 SEK
Snabb leverans
1 - 2 dagar
1 meter insulate tape. 2,2 cm width
Protect the cables on your printer by put on insulate tape. Lengh 1 m, width 2,2 cm
Antal i lager: 11
1 meter insulate tape. 5 cm width
Protect the cables on your printer by put on insulate tape. Lengh 1 m, width 5 cm
Antal i lager: 2
Filament Nipper
Smaller nipper that is perfect to cut of the filament with.
Antal i lager: 0
IGUS DRYLIN RJ4JP-01-08 5-pack
Runs smooth with less noise. Without balls, entirely in polymere, this component can work without...
Antal i lager: 64
Micro Swiss - 0.4 mm -nozzle for MK10 All Metal Hotend ONLY A2 - Hardened Steel
This is Micro Swiss MK10 All Metal Hotend
Antal i lager: 17
220:-
Micro Swiss - 0.5 mm -nozzle for MK10 All Metal Hotend ONLY A2 - Hardened Steel
This is Micro Swiss MK10 All Metal Hotend
Antal i lager: 6
220:-
Micro Swiss - 0.6 mm -nozzle for MK10 All Metal Hotend ONLY A2 - Hardened Steel
This is Micro Swiss MK10 All Metal Hotend
Antal i lager: 0
220:-
PTFE Thermal Barrier Liner for MK10/MK11 Extruder
Passar till MK10 Extruder. 4/2mm. Längd: 36 mm
Antal i lager: 72
Wanhao 2-Pin Male Connector
This 2-Pin connector is used to connect a fan, a heated platform bed, or a power unit to the...
Antal i lager: 19
Wanhao Base plate
This base plate is mounted on the Y axis and holds the bearings. The Heated build plate is...
Antal i lager: 0
149:-
Wanhao Build surface
Fits to Duplicator i3 2.1, i3 Plus and Duplicator 6.
Antal i lager: 2
125:-
Wanhao D6, I3PLUS 350W, 24V PSU, power supply unit.
D6, I3PLUS 350W, 24V PSU, power supply unit.
Antal i lager: 3
399:-
Wanhao D6/ i3 Plus ribbon cable stiffen plastic
Use for make flat cable more stiff. Width: 20 mm
Antal i lager: 4
Wanhao Drill 0,4 mm
Drill that can be used for clean 0,4 nozzle. Use this very careful though it can brake inside the...
Antal i lager: 38
14,90
Wanhao Duplicator i3 glasplatta med klipps
Byggplatten på Di3 är aningen konkavt så att det kan expandera när det värms upp. Lägger man på...
Antal i lager: 22
179:-
Wanhao Duplicator i3 X/Y/E Stepper motor
Wanhao Duplicator i3 X/Y/E Stepper motor
Antal i lager: 0
219:-
Wanhao Filament cooling fan Di3 Plus
24 Volt
Antal i lager: 24
Wanhao Full extruder set to Duplicator i3 Plus
Monterad extruder med tillhörande kablar för att snabbt montera på Duplicator i3 Plus.
Antal i lager: 1
990:-
Wanhao HBP thermistor
Antal i lager: 7
199:-
Wanhao HBP to Duplicator i3 Plus
Heated build platform with cables and thermistor to Duplicator i3 Plus .
Antal i lager: 0
349:-
Wanhao HPP cable i3 Plus
Antal i lager: 2
Wanhao i3 Thumb nut and spring set
Set with 4 x thumb nut, 4 x springs, 4 x washers, 4 x screws and 4 x nuts.
Antal i lager: 0
Wanhao Insulated Cover Pack MK10
Wanhao Insulated Cover Pack MK10.
Antal i lager: 0
Wanhao MK10 Drive Gear to Duplicator i3 Plus
Drive Gear som passar till MK10 extruder. Passar till extrudern på Duplicator i3 Plus.
Antal i lager: 6
Wanhao MK10 hot end
Antal i lager: 7
399:-
Wanhao MK10/MK11 guiding tube
Wanhao MK10 guiding tube
Antal i lager: 15
Wanhao Rod holder Di3, Di3 Plus
Wanhao Rod holder. Passar till Duplicator i3
Antal i lager: 1
Wanhao Thumb nuts
Set med fyra tum-muttrar som ersätter vingmuttrarna som justerar byggplattan på Duplicator 4...
Antal i lager: 23
Wanhao Timing pulley Duplicator i3, I3 Plus
Wanhao Timing pulley Duplicator i3
Antal i lager: 50
Wanhao Y axis rods to Di3 Plus
Rods that fits on the Y axis on Duplicator i3 Plus.
Antal i lager: 0
 
 
 
På svenska In English Auf Deutsch
Priser i: 
 

Sociala medier

Youtube

Kontakt

Box 841
245 18 STAFFANSTORP

info@3dprima.com

+ 46 40 684 97 90