Fri frakt
på ordrar över 1000 SEK
Snabb leverans
1 - 2 dagar
1 meter insulate tape. 2,2 cm width
Protect the cables on your printer by put on insulate tape. Lengh 1 m, width 2,2 cm
Antal i lager: 7
1 meter insulate tape. 5 cm width
Protect the cables on your printer by put on insulate tape. Lengh 1 m, width 5 cm
Antal i lager: 15
Filament Nipper
Smaller nipper that is perfect to cut of the filament with.
Antal i lager: 41
IGUS DRYLIN RJ4JP-01-08 5-pack
Runs smooth with less noise. Without balls, entirely in polymere, this component can work without...
Antal i lager: 12
Micro Swiss - 0.4 mm -nozzle for MK10 All Metal Hotend ONLY A2 - Hardened Steel
This is Micro Swiss MK10 All Metal Hotend
Antal i lager: 13
220:-
Micro Swiss - 0.5 mm -nozzle for MK10 All Metal Hotend ONLY A2 - Hardened Steel
This is Micro Swiss MK10 All Metal Hotend
Antal i lager: 21
220:-
Micro Swiss - 0.6 mm -nozzle for MK10 All Metal Hotend ONLY A2 - Hardened Steel
This is Micro Swiss MK10 All Metal Hotend
Antal i lager: 13
220:-
Micro Swiss - MK8 Plated Wear Resistant Nozzle 0.2 mm
This is MK8 style nozzle, it is made from
Antal i lager: 7
159:-
Micro Swiss - MK8 Plated Wear Resistant Nozzle 0.6 mm
This is MK8 style nozzle, it is made from
Antal i lager: 7
159:-
Micro Swiss 0.2 mm Nozzle for MK10 Allmetal Hotend Kit
This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit
Antal i lager: 6
199:-
Micro Swiss 0.3 mm Nozzle for MK10 Allmetal Hotend Kit
This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit
Antal i lager: 4
199:-
Micro Swiss 0.4 mm Nozzle for MK10 Allmetal Hotend Kit
This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit
Antal i lager: 23
199:-
Micro Swiss 0.6 mm Nozzle for MK10 Allmetal Hotend Kit
This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit
Antal i lager: 9
199:-
Micro Swiss MK10 .4 mm All M​etal Hotend Kit
This is an all metal hotend upgrade kit
Antal i lager: 105
399:-
Micro Swiss MK10 Nozzle 0.4mm upgrade
For PTFE lined hotends only
Antal i lager: 0
169:-
PTFE Thermal Barrier Liner for MK10/MK11 Extruder
Passar till MK10 Extruder. 4/2mm. Längd: 36 mm
Antal i lager: 19
Scraper
Bra att använda för att ta loss objekt från byggplattan.
Antal i lager: 31
39,50
Small scraper
Antal i lager: 9
Vetus HRC40 Tweezers
Verktyg för 3D-printing. Perfekt att pilla bort support material med.
Antal i lager: 7
Wanhao 2 pin female connector
2 pin female connector
Antal i lager: 9
Wanhao 2-Pin Male Connector
This 2-Pin connector is used to connect a fan, a heated platform bed, or a power unit to the...
Antal i lager: 28
Wanhao 24V extruder fläkt D4
Passar till Duplicator 4 seriens extruder.
Antal i lager: 24
Wanhao 24V moderkort fläkt
1 st Wanhao kylfläkt. Dessa fläktar passar till Wanhao Duplicator 4 serien. Denna fläkt är en...
Antal i lager: 60
Wanhao 4-Pin Connector
This 4-Pin connector is used to connect your thermocouples, your (Left extruder heater and fan...
Antal i lager: 10
Wanhao Acrylic Cover Duplicator 4 Series
Wanhao Acrylic Cover for all Wanhao Duplicator 4 models.
Antal i lager: 11
490:-
Wanhao Axel till drivhjul  D4
Passar på höger sida.
Antal i lager: 5
Wanhao Bed Screw and spring set
Wanhao Bed Screw and spring set
Antal i lager: 16
Wanhao Belt - Medium
Medium Belt.
Antal i lager: 5
Wanhao Belt - Small Closed S2M-160
Small Closed Belt S2M-160
Antal i lager: 9
Wanhao Belt - Small Closed S2M-202
Small Closed Belt S2M-202.
Antal i lager: 33
Wanhao Belt large
Wanhao Belt large
Antal i lager: 11
Wanhao Belt Tension Spring
This belt tension spring delivers maximum tension to your belts on the Wanhao Duplicator 4 and 4X...
Antal i lager: 27
Wanhao D4X Touch Panel
This touch controller replaces the touch pad found on the front of the Duplicator 4 and 4X printers.
Antal i lager: 9
149:-
Wanhao endstop cable
This endstop switch cable connects the Duplicator 4's (and 4X's) microcontrollers to it's endstop...
Antal i lager: 5
Wanhao extruder carriage D4
Plastic carriage to dual extruder on Duplicator 4/4x/4S
Antal i lager: 7
180:-
Wanhao extruder metal bar MK10
Wanhao extruder metal bar MK10
Antal i lager: 8
119:-
Wanhao extruder metal bar MK8/MK9
Wanhao extruder metal bar MK8/MK9.
Antal i lager: 15
119:-
Wanhao Filament guide D4
Wanhao Filament guider D4 passar till Duplicator 4/4X/4S.
Antal i lager: 5
Wanhao Flat Interface Cable
Wanhao interfacekabel kopplar Duplicator 4 och 4X touchplatta med SD läsare till Mightyboard...
Antal i lager: 10
149:-
Wanhao Glas Plate with Clips 4X/4S
Wanhao Glas Plate with Clips
Antal i lager: 20
179:-
Wanhao Heat Board Cabel Set
Heat Board Cabel Set
Antal i lager: 7
149:-
Wanhao Heating cartridgeDuplicator 4
Wanhao Heating Cartridge for Duplicator 4.
Antal i lager: 28
Wanhao Heating Plate 4 series
This Heated Bed Kit replaces the bed assembly on the Duplicator 4, 4X and 4S printers. Pull out...
Antal i lager: 2
399:-
Wanhao Hot end nozzle mounting block MK10
Wanhao Hot end nozzle mounting block.
Antal i lager: 31
Wanhao Hot end nozzle mounting block MK8/MK9
Wanhao Hot end nozzle mounting block
Antal i lager: 36
Wanhao Insulated Cover Pack MK10
Wanhao Insulated Cover Pack MK10.
Antal i lager: 161
Wanhao Kontrollpanel till Duplicator 4S
Kontrollpanel med kortläsare.
Antal i lager: 4
149:-
Wanhao LCD Screen 4x / 4s
This LCD display replaces the display found on the front of the Duplicator 4 and 4X printers.
Antal i lager: 3
199:-
Wanhao LCD to Touch Controller cable D4
This cable bunch connects the Duplicator 4's (and 4X's) LCD screen to the Touch Controller. This...
Antal i lager: 10
149:-
Wanhao LED strip
Wanhao LED strip som passar alla Wanhao Duplicator skrivare utom Duplicator 5.
Antal i lager: 9
Wanhao Left Rod Mount
Vänster färste
Antal i lager: 2
130:-
Wanhao M3x3 Setskruv
Används för att hålla värmepatronen på plats.
Antal i lager: 18
Wanhao M4x3 Setskruv
Används för att hålla guiding tube på plats.
Antal i lager: 66
Wanhao Mainboard DP4/4X/4S
MightyBoard is a DIY Open Source 3D Printer Control Board
Antal i lager: 9
1 390:-
Wanhao MK10 full set Double Extruder
New MK10 dual-extruder assembly replaces the MK9 assembly on the Duplicator 4 and 4X. Includes 2...
Antal i lager: 2
1 490:-
Wanhao MK10 hot end
Antal i lager: 4
399:-
Wanhao MK10/MK11 guiding tube
Wanhao MK10 guiding tube
Antal i lager: 25
Wanhao MK10/MK11 noozle
Nozzle to MK10/MK11 Extuder.
Antal i lager: 23
110:-
Wanhao MK8-MK10 Drive Gear D4
Drive Gear som passar till MK8/9, MK10 extruder.
Antal i lager: 14
Wanhao MK8/9 guiding tube
Antal i lager: 4
Wanhao MK8/9 nozzle
This brass extruder nozzle replaces broken, fractured, and clogged nozzles on your MK8 and MK9...
Antal i lager: 16
Wanhao MK9 extruder topplate cover
Denna övre täckplatta passar över MK9 dubbla extruders för montering på Duplicator 4 och 4X. Ta...
Antal i lager: 4
Wanhao MK9 uppgrade Kit
Wanhao MK9 uppgrade Kit
Antal i lager: 5
149:-
Wanhao Platform arm to D4
Antal i lager: 4
599:-
Wanhao Power Supply Unit D4 - 4X / 4S
Replacement Power Supply Unit for the Duplicator 4 and 4X.
Antal i lager: 4
399:-
Wanhao PTFE Thermal Barrier Liner MK8/MK9
Passar till MK8 och MK9 Extruder. 3/2mm
Antal i lager: 7
Wanhao Right Rod Mount
Höger fäste
Antal i lager: 3
130:-
Wanhao Rod holder D4
Wanhao Rod holder. Passar till Duplicator D4. Gjorda av metall.
Antal i lager: 11
Wanhao Stepper Motor Driver D4 - 4X / 4S
This Stepper Motor Driver with Heatsink replaces one of five drivers found on the Wanhao...
Antal i lager: 36
139:-
Wanhao Stop Switch for 4x/4S
1 x Genuine Wanhao replacement Endstop switch. These switches are located at the end of each axis...
Antal i lager: 20
119:-
Wanhao Stor spolhållare D4, D5, i3, D6
Ytterdiameter: 30mm
Antal i lager: 24
Wanhao Thermocoupler Kabel D4
Wanhao Thermocoupler
Antal i lager: 31
Wanhao Timing pulley D4
Wanhao Timing pulley
Antal i lager: 49
Wanhao Wire pulley
Passar till MK10 extruder.
Antal i lager: 18
Wanhao X- axis rod to D4
Antal i lager: 2
Wanhao X/Y Stepper motor cable for D4 series
Wanhao Step motor cable.
Antal i lager: 2
Wanhao XY axis motor
This X & Y Axis Stepper Motor replaces those found on the Duplicator 4 and 4X printers.
Antal i lager: 10
249:-
Wanhao Z Axis Motor
This Z Axis stepper motor with threaded shaft replaces the motor driving the Z Axis up & down on...
Antal i lager: 3
490:-
Wanhao Z-axel Stegmotorkabel D4
Stegmotorkabel som passar till z-axeln på Wanhao Duplicator 4 serien.
Antal i lager: 29
På svenska In English Auf Deutsch
Priser i: 
 

Sociala medier

Youtube

Kontakt

Box 841
245 18 STAFFANSTORP

info@3dprima.com

+ 46 40 684 97 90