Flashforge Finder

In stock: 6

ships within 24 hours

Getting started with 3D printing and Flashforge Finder is much easier and more affordable than ever. You will be capable of printing right out of the box with few tweaks. All the heated elements are protected from touch, and the manufacturing material is non-toxic PLA. Finder is the perfect starter 3D printer for families, schools as well as novice users.
Main product features:

  • Fully assembled and plug&play
  • Assisted leveling of build platform
  • TouchScreen & Wifi
  • Safe and silent 3D printing

  • 499,00 €
    incl. VAT excluding Shipping costs

    Mfg part No.:
    Item Nr:

    Flashforge Finder – Easy-to-use 3D printer

    Introducing the next generation of easy-to-use 3D printers – An experience unlike any other.
    Flashforge Finder is the easiest-to-use 3D printer so far. It is fully assembled and plug&play. With its assisted leveling system, you just need to do very few tweaks before starting your 3D prints. The Flashforge Finder comes featured with a 3.5-inch touchscreen panel, filament-run-out detection, USB stick, 2nd Generation Wi-Fi connection and more. It delivers you a top-notch user experience that any other 3D printers cannot.

    Main product characteristics:

    • Fully assembled
    • Plug&play
    • Assisted leveling of build platform
    • Easy operation due to touch-screen
    • Wifi connectivity
    • Innovative filament management
    • Safe and silent 3D printing

    Intelligent assisted leveling system – More precise and easier calibration.
    Finder features an intuitive calibration detection system to assist leveling. You are directed to tighten or loosen leveling screws until a beeper barely sounds. The system detects the distance between nozzle and build plate to verify whether your leveling is at the right position. Once the first location is leveled, you’re directed to next two screw locations accordingly with same operation. During this entire process, you’re well instructed with clear messages on the touchscreen display. All these functionalities make calibration much easier and more precise than it had been before.

    Operation is easy – Just like your smartphone.
    This 3D printer has a 3.5-inch HD IPS touchscreen right at the top of the it with large, easy to understand controls. It will only take you 4 taps to start your 3D print, no need to connect it to your computer! See previews of model files and identify the part you want to manufacture. Real-time view of your 3D printing status shows you know when your 3D print will be finished. Built-in multiple languages compatibility, including English, German, French, Dutch, Polish, Korean and Japanese. This guarantees its ease of use.

    2nd Generation Wireless connection – More stable connection.
    Flashforge Finder features the 2nd generation Wi-Fi connection with more stable wireless file transmission. Now you can send directly 3D files from your computer to Finder. 4GB memory offers you enough space to transfer data with your own Wi-Fi network under AP or STA modes. USB stick is another stable way to transfer files. No USB cable means no interruption even when your computer runs into standby.

    Excellent and innovative filament management.
    The filament management on the Flashforge Finder is rather impressive. The cartridge housing for 1.75 mm Flashforge PLA filament can detect when filament is running out. It alerts you to load new filament instead of getting stuck with extruding nothing. Finder can be used with third-party filament if you turn off this function in the settings.

    Slide-in build plate – Remove 3D prints easy.
    Slide-in build plate allows you to take it out of the 3D printer. Now you can remove the finished 3D prints more easily. At same time, it can minimize damages or offsets to the build plate.

    Safe and quiet to use.
    The Finder has a very stylish design with cables concealed from sight within the plastic alloy frame. All the heated components are kept away from touch. Single non-toxic PLA filament option keeps your creations simple and fun. The noise level is as low as 50 dB, or even less. All of these make it the kind of 3D printer great for kids of all age or home 3D printing users alike.

    Introducing FlashPrint.
    Simplicity and functionality combined.
    With simple and intuitive interface and a list of presets for build quality, FlashPrint enables you to enter the wonderful world of 3D printing more easily. The software is featured with smart support, 2D image importing into 3D model, cut and more. It is a functional slicer software that gives you more possibilities.

    Buy now the easy-to-use Flashforge Finder and you'll get a 3D printer with touch screen.

    Technology: Fused Filament Fabrication (FFF)
    Extruders: 1 Single extruder
    Interface: 3.5-inch HD IPS touchscreen
    Buildvolume: 14 x 14 x 14 cm
    Resolution: 0.1 mm - 0.4mm (100 microns - 400 microns)
    Printing speed: 40 ~ 100 mm/s
    Nozzle temperature: 220 - 240°C
    Platform temperature: na
    Supported filament: PLA
    Nozzle diameter: 0.4 mm
    Filament diameter: 1.75 mm
    Connectivity: USB 2.0, WIFI & SD
    Supported software: Flashprint
    Supported fileformat: STL, OBJ
    Size: 480 x 338 x 385mm
    Supported Operating System: Windows 7 / 8(.1) / 10, Mac OS X 10.8 and above
    Weight: 18 kg
    • FLASHFORGE Finder
    • One Spool of Filament (PLA)
    • USB Cable
    • Tool Kits
    • 2GB SD Card

    Log in to post a review.
    There are no reviews to display.

    Related products
    BuildTak spatula
    BuildTak spatula

    Price incl. VAT shipping

    BuildTak 3D Print Surface - 139 x 139 mm (5,5" x 5,5")
    BuildTak 3D Print Surface - 139 x 139 mm...

    Price incl. VAT shipping

    Shopping cart (0)
    Your shopping cart is empty.