Taulman BluPrint - 2.85mm - 450g

I lager: 2

för omgående leverans

349,00 SEK
199,00 SEK
Inkl. moms exkl. fraktkostnader

Tillverkarens ArtNr:
Vårt ArtNr:

BluPrint has a Tg of 110C+ but with a print temp of only 265C. Prints cold orwarm (45C) BuilTak and on clean glass heated to ~92C. BluPrint is a semi-clear material of ~ 84% transmission. Like all taulman3D materials, BluPrint is a 100% bonding layer to layer polymer when printed at defined temperatures. A significant advantage of BluPrint is that when paired with the new E3D Volcano hotend, users and industry can print at speeds of 44mm/s with a 1mm nozzle and .46mm layer. As layer and nozzle size go down, speeds increase as expected to 120mm/s with a .4mm nozzle. BluPrint will allow designers to 3D Print parts that will take high heat for outdoor use such as part
replacements for Autos, Boats and Aircraft.

Print temp 265C - 270C
Nozzle any size
Print speed ABS speeds = 50%
Retraction .5mm/.1mm nozzle or fop a .5mm nozzle = 2.5mm
Print bed Glass heated to 95C
Cold = Clean BuildTak or PEI

Logga in för att skriva ett omdöme
Det finns inga omdömen att visa

Relaterade produkter
169,00 SEK

Pris inkl. moms frakt

BuildTak Spatel
BuildTak Spatel
219,00 SEK

Pris inkl. moms frakt

79,00 SEK

Pris inkl. moms frakt

Kundvagn (0)
Kundvagnen är tom