Magigoo PC - The 3D printing adhesive

In stock: 21

ships within 24 hours

Do you have problems with warping when 3D printing? Then MAGIGOO is an easy-to-use 3D printing adhesive designed to solve the problem of first non-sticky layer (warping). This is the most common problem in 3D printing for manufacturing with FFF / FDM technology.
Product features of Magigoo adhesive :

  • Pen with adhesive makes your 3D prints stick to the surface easily
  • Reduces warping to a minimum
  • Save time, filament & nerves

  • 20,90
    (Base price: 20,90 € / piece)
    incl. VAT excluding Shipping costs

    Mfg part No.:
    Item Nr:


    MAGIGOO PC is designed to work exclusively with polycarbonate type filaments. This

    adhesive for professional use makes sure prints stick firmly when the print-bed is hot and

    that the part is easy to remove once it cools. This unique and innovative mechanism

    means that no tools are needed to remove prints from the bed. They just pop off when the

    bed cools down.


    The strength and toughness of PC make it an ideal FDM material for the production of

    functional prototypes as well as end use part, nonetheless the material does present some

    printing challenges. Virgin PC has a high glass transition temperature (Tg) and thus can be

    used in high temperature applications. However, having a high Tg can make it very difficult

    to print using desktop printers, as these are usually not equipped to cater for the high

    printing temperatures required to print virgin PC. Virgin PC in fact tends to warp

    considerably when printed at an insufficient bed temperature (<130 ºC), in non-heated

    enclosed chambers without the use of an appropriate bed adhesive. Certain

    manufacturers have improved the printability of PC by the use of plasticizers or blending

    with other materials. Nonetheless when using these solutions some difficulties are still

    encountered, firstly with adhesion especially on larger parts still can be an issue. In

    addition to this some bed adhesion sheets have been proposed to avoid the warp

    encountered in larger prints, but in this case there is a high tendency that the adhesion

    sheet being used fuses irreversibly to the print. This means that the expensive sheet

    needs to be removed very often and also incurs a lot of post processing and cleaning.

    Magigoo PC can be used on glass or multiple other surfaces. Use on other plastic based

    surfaces, including sheets is recommended to provide strong adhesion and preventing the

    part to fuse to the sheet.


    MAGIGOO PC has been designed and tested to work with different PC filament brands.

    As the composition of each plastic is a little different, the ideal settings for MAGIGOO PC

    may vary.

    • Shake the bottle.
    • Apply to the desired area by pressing the nib on the bed (activating the inner valve)

    and spreading as needed.

    • Print according to the filament/printer manufacturers recommendations
    • Allow to cool and Remove. The print should pop right off
    • Clean - Use a damp cloth to wipe off.



    Using this product with other than PC type filaments might cause over adhesion and

    damage your build surface.


    For larger prints a 20 mm brim with multiple layers is recommended

    In cases of excess adhesion, it is recommended to wet print bed with a small amount of

    water slowly work it below the part, this should make part removal easier


    Log in to post a review.
    There are no reviews to display.

    Related products
    PrimaSelect PC (Poly Carbonate) - 1.75mm - 500 g - Clear
    PrimaSelect PC (Poly Carbonate) - 1.75mm...

    Price incl. VAT shipping

    PrimaSelect PC (Poly Carbonate) - 2.85mm - 500 g - Clear
    PrimaSelect PC (Poly Carbonate) - 2.85mm...

    Price incl. VAT shipping

    Shopping cart (0)
    Your shopping cart is empty.