Bondtech DDX v3 For Creality
- Article no. 26309
- Article no. 7643
- EAN 7350011414079
- Mfg part No, EXT-KIT-77-V3
Compatibility Table:
Compatible with the following models:
- Ender-3
- Ender-3 v2;
- Ender-3 Pro;
- Ender-5;
- Ender-5 Pro;
- Ender-5 Plus*1;
- Ender-6
- CR-10
- CR-10 (Mini);
- CR-10S;
- CR-10 S4;
- CR-10 S5.
- CR-10 v2
- CR-10 v3
- CR-10S Pro;
- CR-10S Pro v2;
- CR-10 Max*2;
*1 Using DDX v3 on Ender-5 Plus
On the Ender-5 Plus, the DDX fan shroud will collide with the right hand rail if nothing is changed on the unit. To fix that problem we sell the SLS DDX Bed Rod Holder Set for Ender-5 Plus and supply as alternative the STL file of the new Z-rod holder that can solve this issue. Download the file from the list here.
*2 Using DDX v3 on CR-10 Max
On the Cr-10 Max the z-height will be limited to in between 430mm and 455mm, instead of the original 470.
This is due to the higher position of the push-fit on our extruder, that forces the bowden to bend at a lower level under the top bar. Use the Z(height) parameter at Machine Settings in the slicer to reflect this lower limit. Select the lower value and fine tune the max Z with testing.
Step By Step Guides:
These are the guides that apply to the DDX Direct Drive eXtruder for Creality:
DDX For Creality Step By Step Guides
Guides For CR-10S Pro and similar
01. Stripping Down Your Creality CR-10S Pro
02. Installing DDX On Creality CR-10S Pro
Guides For Ender-3 and similar
01. Stripping Down Your Creality Ender-3
02. Installing DDX On Creality Ender-3
Guides For Ender-5 and similar
01. Stripping Down Your Creality Ender-5
Other suitable products