Product | Print range | We use | Heat bed | Print speed range | Fan speed | Retraction | Flow rate | User level | Notes |
|
|
|
|
|
|
|
|
|
|
SELECT PLA | 185 - 220°C | 210°C | 0 - 60°C | 30 - 80 mm/s | 85 - 100% | 1,5 - 5 mm | 100% | Very Easy | Small risk of warping. No hazardous or unpleasant smell. Matte to very shiny surface. + 5-10°C for white. |
SELECT PLA Glossy | 210 - 230°C | 220°C | 220°C | 40mm/s | 30% | 1,5 - 5 mm | 100% | Very Easy | Prints like normal PLA but is slightly more fragile. Minimum 3-4 outlines for best performance. |
SELECT PLA Pro | 220 - 255°C | 245°C | 0 - 60°C | 50 - 140 mm/s | 90 - 100% | 1,5 - 5 mm | 95 - 105% | Medium | Can be cured in an oven. Works best with speeds 100 mm/s and higher. High temp resistance after annealing. Matt finish. |
SELECT ABS | 220 - 265°C | 250°C | 90 - 110°C | 35 - 80 mm/s | 0 - 20% | 1,5 - 5 mm | 100 - 105% | Medium | Strong. Needs enclosure. Use in ventilated area. Matt finish. |
SELECT ABS+ | 235 - 260°C | 245°C | 80 - 95°C | 30 - 80 mm/s | 0 - 25% | 1,5 - 5 mm | 104 - 107% | Medium | Requires heated bed. Much stronger than regular ABS. |
SELECT PETG | 195 - 225°C | 215°C | 40 - 65°C | 35 - 80 mm/s | 10 - 100% | 1,5 - 5 mm | 105 - 110% | Easy | Strong. FDA approved. Durable. Shiny finish. A layer height of 0.2 mm or higher gives best result. |
SELECT ASA+ | 230 - 260°C | 245°C | 80 - 95°C | 35 - 80 mm/s | 0 - 25% | 1,5 - 5 mm | 100 - 102% | Medium | UV resistant. Waterproof. Great for outdoor use. Matte finish. Requires heated bed. |
SELECT HIPS | 225 - 265°C | 255°C | 95 - 110°C | 35 - 80 mm/s | 25 - 50% | 1,5 - 5 mm | 100% | Easy/Medium | Often used as support for ABS. High impact strength. Needs enclosure for best result. Heated bed required. |
SELECT Flex | 220 - 260°C | 240°C | 90 - 110°C | 15 - 35 mm/s | 40 - 100% | 0 - 3 mm | 100 - 105% | Medium | Works in most printers. Very flexible. Strong. Semi glossy finish. Shore value 45 D. Less retraction produce less stringing. |
SELECT Wood | 200 - 230°C | 205°C | 0 - 60°C | 20 - 35 mm/s | 60 - 100% | 0 - 3 mm | 100 - 104% | Easy | PLA with 40% wood. Smells and feels like wood. Use nozzle with diameter 0.6 mm or larger. Matte finish. |
SELECT Carbon | 235 - 265°C | 250°C | 0 - 60°C | 35 - 80 mm/s | 50 - 100% | 1,5 - 5 mm | 100% | Easy/Medium | Very stiff. Based on PETG. Requires hardened nozzle, minimum 0.6 mm. Matte surface. |
SELECT PVA HT | 240 - 260°C | 247°C | 0 - 60°C | 15 - 80 mm/s | 5 - 30% | 1,5 - 5 mm | 100% | Medium | Use as support material. Water soluble. Very hygroscopic, store well. Works with heated chambers up to 60 °C. Works great with ABS, ABS+, ASA+. |
SELECT PVA+ | 185 - 205°C | 195°C | 0 - 60°C | 25 - 65 mm/s | 0 - 30% | 1,5 - 5 mm | 104 - 106% | Medium | Use as support material. Water soluble. Very hygroscopic, store well. Works with heated chambers up to 60 °C. Works great with ABS, ABS+, ASA+. |
SELECT Metal | 195 - 225°C | 205°C | 0 - 60°C | 30- 60 mm/s | 80 - 100% | 1,5 - 5 mm | 100 - 105% | Easy | 80% metal powder. Can be post processed to look like real metal. Very heavy. Use hardened nozzle min 0.4 mm. Bed adhesion is great, use blue tape to protect glass plate. |
SELECT PC | 270 - 290°C | 275°C | 110 - 120°C | 30 - 65 mm/s | 0 - 25% | 1,5 - 5 mm | 103 - 107% | Hard | Very strong and high heat resistance. All-metal hot-end required. Heated bed required. Enclosure recommended. |
SELECT PP | 230 - 240°C | 235°C | 0 - 100°C | 30 - 50 mm/s | 20 - 80% | 1,5 - 5 mm | 100% | Medium | Light weight. Food safe. Can be used in micro and dishwasher. Needs adhesive for sticking on build plate. |
SELECT NylonPower | 250 - 265°C | 260°C | 60 - 80°C | 35 - 50 mm/s | 0 - 20% | 1,5 - 5 mm | 100 - 105% | Medium | Very strong. Stiff (Carbon) Semiflex (Glassfiber). Requires hardened nozzle. Matte finish. Use brim for best bed adhesion. |
SELECT PEEK | 360 - 400°C | 380°C | 120°C | n/a | n/a | n/a | n/a | Expert | Can replace steel in many applications. Very strong. High heat resistance. Need heated and enclosed chamber. |
EasyPrint PLA | 180 - 215°C | 197°C | 0 - 60°C | 25 - 100 mm/s | 95 - 100% | 1,5 - 5 mm | 100% | Very Easy | For the colors, gold, silver and bronze you can use a print temp of 185-195°C. |
EasyPrint PETG | 210 - 235°C | 215°C | 0 - 60°C | 15 - 100 mm/s | 10 - 100% | 1,5 - 5 mm | 100 - 105% | Very Easy | Different speed and fan settings gives different visual and strenght results depending on use. |
EasyPrint Flex | 180 - 195°C | 190°C | 40 - 70°C | 20 - 40 mm/s | 90 - 100% | 0 - 2 mm | 100% | Medium | Slower speeds often provides better results. |
Value PLA | 185 - 220°C | 210°C | 0 - 60°C | 30 - 80 mm/s | 85 - 100% | 1,5 - 5 mm | 100% | Very Easy | + 5-10°C for white |
Value ABS | 220 - 265°C | 255°C | 90 - 110°C | 35 - 80 mm/s | 0 - 20% | 1,5 - 5 mm | 100 - 105% | Easy | Requires heated bed and enclosed chamber (optional) for best results. |
